APPLICABLE STANDARD
FREQUENCY
RANGE
STORAGE
0.045 TO 3 GHz
-40C TO +85C
TEMPERATURE RANGE
CHARACTERISTIC
IMPEDANCE
RATING POWER
50Ω
4 W
OPERATING
TEMPERATURE RANGE
OPERATING HUMIDITY
RANGE
-40C TO +85C
% TO 90%(Non condensing)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA MAX (DC OR 1000 Hz).
50 m MAX.
×
×
INSULATION RESISTANCE
VOLTAGE PROOF
V.S.W.R.
100 V DC.
1000 M MIN.
-
×
×
NO FLASHOVER OR BREAKDOWN.
100 V AC FOR 1 min.
×
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
FREQUENCY
0.045 TO 1.0 GHz
N・C,N・O : 1.2 MAX
N・C,N・O : 1.4 MAX
N・C,N・O : 1.7 MAX
1.0
2.0
TO 2.0 GHz
TO 3.0 GHz
×
×
×
-
-
-
1
INSERTION LOSS
0.045 TO 1.0 GHz
N・C : 0.2dB MAX.
N・C : 0.4dB MAX.
N・C : 0.6dB MAX.
N・O : 0.3dB MAX.
1.0
2.0
TO 2.0 GHz
TO 3.0 GHz
N・O : 0.5dB MAX.
N・O : 1.0dB MAX.
1
ISOLATION
20 dB MIN.
0.045 TO 1.0 GHz
18 dB MIN.
12 dB MIN.
1.0
2.0
TO 2.0 GHz
TO 3.0 GHz
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
5000 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE : 100mMAX.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
VIBRATION
FREQUENCY 10 TO 500 Hz
1) NO ELECTRICAL DISCONTINUITY OF 10s.
2) CONTACT RESISTANCE : 100mMAX.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
SINGLE AMPLITUDE 0.75 mm, 98 m/s2
1 CYCLE : 11min, 10 CYCLES FOR EACH 3 DIRECTIONS.
ACCELERATION : 490 m/s2
DURATION : 11 ms , HALF SINE WAVE
3 BOTH AXIAL DIRECTIONS, 3 TIMES EACH
MEASURED BY APPLICABLE CONNECTOR.
SHOCK
-
INSERTION AND
INSERTION
FORCE
: 1~10N
-
×
×
WITHDRAWAL FORCES
(INITIAL VALUE)
WITHDRAWAL FORCE : 3~15N
-
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
1) CONTACT RESISTANCE: 100 m MAX.
2) INSULATION RESISTANCE: 10 M MIN.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
TEMPERATURE –55 → 5-35 → +85 → 5-35 C
TEMPERATURE
TIME
min.
30 → 2-3 → 30 → 2-3
×
-
UNDER 100 CYCLES AND LEAVE IT FOR ONE HOUR
OR TWO.
SALT MIST
EXPOSED IN 5±1%
1) CONTACT RESISTANCE : 100mMAX.
2) NO HEAVY CORROSION.
TEMPERATURE 35±2℃
×
×
-
-
SALT WATER SPRAY FOR 48h
DAMP HEAT
EXPOSED AT +40℃, 90~95%,96h.
THEN LEAVE IT FOR ONE HOUR OR TWO IN THE
AMBIENT TEMPERATURE AND HUMIDITY.
1) CONTACT RESISTANCE: 100 m MAX.
2) INSULATION RESISTANCE: 10 M MIN.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
(STEADY STATE)
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KH.IKEDA
15.08.03
15.08.03
15.08.03
15.08.03
RoHS COMPLIANT
NK.NINOMIYA
RO.FURUYAMA
RO.FURUYAMA
1
N・O SPEC INCLUDE MS-151-C(LP) AND CABLE .
Unless otherwise specified, refer to IEC-60512.
Note QT:Qualification Test AT:Assurance Test ×:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-353753-01-01
MS-151NB-1(01)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/1
CL358-0345-4-01
△
FORM HD0011-2-1