Order this document
by MRFIC2004/D
SEMICONDUCTOR TECHNICAL DATA
The MRFIC Line
The MRFIC2004 is an integrated Driver and Ramp designed for transmitters
operating in the 800 MHz to 1.0 GHz frequency range. The Ramp is an
integrator which can be used for burst control for TDD/TDMA systems. The
Driver uses a cascode configuration for high gain and reverse isolation. A power
down control is provided to minimize current drain with minimum recovery/turn-
on time. Also, an on-board inverter is included to provide complementary
control for an antenna switch, such as the MRFIC2003. The design utilizes
Motorola’s advanced MOSAIC 3 silicon bipolar RF process to yield superior
performance in a cost effective monolithic device. Applications for the
MRFIC2004 include CT1 and CT2 cordless telephones, GSM, remote controls,
video and audio short range links, low cost cellular radios, and ISM band
transmitters.
900 MHz DRIVER
& RAMP
SILICON MONOLITHIC
INTEGRATED CIRCUIT
•
•
•
•
•
•
•
•
Small Signal Gain = 21.5 dB (Typ)
Small Signal Gain Control = 34 dB (Typ)
P
= –1.0 dBm (Typ)
o 1.0 dB
On Board Ramp for Burst Control
Power Down Supply Current = 0.7 mA (Typ)
Low Operating Supply Voltage (2.7 to 4.0 Volts)
Input/Output VSWR Insensitive to Gain Control
Order MRFIC2004R2 for Tape and Reel.
R2 Suffix = 2,500 Units per 16 mm, 13 inch Reel.
Device Marking = M2004
CASE 751B-05
(SO-16)
•
ABSOLUTE MAXIMUM RATINGS (T = 25°C unless otherwise noted)
A
Rating
Symbol
Value
Unit
Supply Voltages
V
CC1
V
CC2
4.5
6.0
Vdc
Control Voltages
RXEN, TXEN, V
6.0
Vdc
dBm
°C
cont
Input Power, RF IN Port
Operating Ambient Temperature
Storage Temperature
P
RF
+10
T
A
–35 to +85
–65 to +150
T
stg
°C
RX EN
GND
1
2
3
4
5
6
7
8
16 RX EN
15 GND
V
14 RF OUT/V
13 GND
CC1
CC2
GND
DRIVER
V
12 GND
RAMP
C INT
11 RF IN
10 GND
RAMP
GND
V
cont
(GAIN CONTROL)
TX EN
9
Pin Connections and Functional Block Diagram
REV 2
MOTOROLA RF DEVICE DATA
Motorola, Inc. 1997
MRFIC2004
1