MPXA6115A
Rev 3, 01/2007
Freescale Semiconductor
Technical Data
High Temperature Accuracy
Integrated Silicon Pressure Sensor
for Measuring Absolute Pressure,
On-Chip Signal Conditioned,
Temperature Compensated and
Calibrated
MPXA6115A
MPXH6115A
SERIES
INTEGRATED PRESSURE SENSOR
15 TO 115 kPA (2.2 TO 16.7 psi)
0.2 TO 4.8 V OUTPUT
The MPXA6115A/MPXH6115A series sensor integrates on-chip, bipolar op
amp circuitry and thin film resistor networks to provide a high output signal and
temperature compensation. The small form factor and high reliability of on-chip
integration make the pressure sensor a logical and economical choice for the
system designer.
SMALL OUTLINE PACKAGE
The MPXA6115A/MPXH6115A series piezoresistive transducer is a state-of-
the-art, monolithic, signal conditioned, silicon pressure sensor. This sensor
combines advanced micromachining techniques, thin film metallization, and
bipolar semiconductor processing to provide an accurate, high level analog
output signal that is proportional to applied pressure.
MPXA6115C6U/C6T1
CASE 482A-01
MPXA6115A6U/6T1
CASE 482-01
Figure 1 shows a block diagram of the internal circuitry integrated on a
pressure sensor chip.
SMALL OUTLINE PACKAGE
PIN NUMBERS(1)
Features
1
2
3
4
N/C
VS
5
6
7
8
N/C
N/C
N/C
N/C
•
•
•
•
•
•
Improved Accuracy at High Temperature
Available in Small and Super Small Outline Packages
1.5% Maximum Error over 0° to 85°C
Ideally suited for Microprocessor or Microcontroller-Based Systems
Temperature Compensated from -40° to +125°C
Durable Thermoplastic (PPS) Surface Mount Package
GND
VOUT
1. Pins 1, 5, 6, 7, and 8 are internal device
connections. Do not connect to external
circuitry or ground. Pin 1 is denoted by the
notch in the lead.
Typical Applications
•
•
•
•
Aviation Altimeters
SUPER SMALL OUTLINE PACKAGE
Industrial Controls
Engine Control/Manifold Absolute Pressure (MAP)
Weather Station and Weather Reporting Device Barometers
ORDERING INFORMATION
MPXH6115A6U/6T1 MPXH6115AC6U/C6T1
Device
Type
Case
No.
MPX Series
Order No.
Packing
Options
Device
Marking
Options
CASE 1317-04
CASE 1317A-03
SMALL OUTLINE PACKAGE
SUPER SMALL OUTLINE PACKAGE
PIN NUMBERS(1)
Basic
Element
Absolute, Element Only
482 MPXA6115A6U
482 MPXA6115A6T1
482A MPXA6115AC6U
482A MPXA6115AC6T1
Rails
MPXA6115A
Absolute, Element Only
Absolute, Axial Port
Absolute, Axial Port
Tape & Reel MPXA6115A
Rails MPXA6115A
Tape & Reel MPXA6115A
1
2
3
4
N/C
VS
5
6
7
8
N/C
N/C
N/C
N/C
Ported
Element
SUPER SMALL OUTLINE PACKAGE
GND
VOUT
Basic
Element
Absolute, Element Only
Absolute, Element Only
Absolute, Axial Port
Absolute, Axial Port
1317 MPXH6115A6U
1317 MPXH6115A6T1
1317A MPXH6115AC6U
1317A MPXH6115AC6T1
Rails
Tape & Reel MPXH6115A
Rails MPXH6115A
Tape & Reel MPXH6115A
MPXH6115A
1. Pins 1, 5, 6, 7, and 8 are internal device
connections. Do not connect to external
circuitry or ground. Pin 1 is denoted by the
notch in the lead
Ported
Element
© Freescale Semiconductor, Inc., 2007. All rights reserved.