MPFC-115-3PH-270-FP
Power Factor Correction
Full-brick
Military Grade
3-Phase Power Factor correction Module
115 Vrms L-N 45 Hz to 800 Hz
270 Vdc
1.5 kW
100 °C
1.5%
94%
Input Voltage
Input Frequency
Output Voltage
Output Power Baseplate Temp
THD
Full Load Efficiency
The MilCOTS 3-Phase MPFCQor Power Factor
Correction module is an essential building
block of an AC-DC power supply. Used in
conjunction with one of SynQor’s matched
3-Phase AC line filters and a limited amount
of stabilizing capacitance, this MPFCQor
will draw well-balanced and low-distortion
sinusoidal currents from each phase of a
3-Phase AC input. It is designed to comply
with a wide range of military standards and is
manufactured in the United States.
Hz
45-800
(L-N)
kW
85-140 Vrms
1.5
Vdc
A
6
PFC-115-3PH-270-FP-N-M
CONVERTER
M
270
AC-DC
AC INPUT: 3-Phase
PUT:
OUT
DC
S/N
S16820831
3515-600 CAGE CODE 1WX10
D/C
Operational Features
Designed and manufactured in the USA
• Full-brick form factor
• 1.5 kW continuous rating at 100 °C baseplate temperature
• Semi-regulated output: 270 Vdc
Control Features
• Compatible with Military Standard 60 Hz, 400 Hz and var. freq. systems
• Meets military standards for harmonic content
• Enables systems with repetitive load transients to pass MIL-STD-461
CE101 requirement by offering superior load current rejection
• Minimal inrush current
• All control pins referenced to separate floating return
• Asynchronous serial data interface
• AC and DC Power Good outputs
• PFC Enable and Battle Short inputs
• 3.3 V always-on standby power output
• Clock synchronization output
• Balanced phase currents
• High power factor (0.98 at 400 Hz / 1.5 kW)
• Minimal external output capacitance needed
• Supports full load current during startup ramp
• Additional input filters available to meet full EMI
• N * 1.5 kW power levels when paralleled
Protection Features
• Output current limit and auto-recovery short circuit protection
• Auto-recovery input under/over-voltage protection
• Auto-recovery output over-voltage protection
• Auto-recovery thermal shutdown
Compliance Features
3-Phase PFCQor series converters are designed to meet:
(With an MCOTS 3-Phase AC input filter)
• MIL-STD-704 (A-F) w/ leading power factor
• MIL-STD-461 (C, D, E, F)
• MIL-STD-1399 (at 200 Vrms L-L)
• MIL-STD-810G
Contents Features
Page No.
Typical Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mil-STD-810G Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Encased Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Mechanical Features
• Industry standard Full-brick-size
• Size: 2.486” x 4.686” x 0.512” (63.14 x 119.02 x 13.0 mm)
• Weight: 11.3 oz (320 g)
Product # MPFC-115-3P-270-FP
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0006513 Rev.
D
01/09/2017
Page 1