5秒后页面跳转
MPC962305D-1H PDF预览

MPC962305D-1H

更新时间: 2024-09-23 20:16:11
品牌 Logo 应用领域
恩智浦 - NXP 驱动光电二极管输出元件逻辑集成电路
页数 文件大小 规格书
12页 439K
描述
IC,1:5 OUTPUT,SOP,8PIN,PLASTIC

MPC962305D-1H 技术参数

是否Rohs认证: 不符合生命周期:Transferred
零件包装代码:SOIC包装说明:0.150 INCH, SOIC-8
针数:8Reach Compliance Code:not_compliant
HTS代码:8542.39.00.01风险等级:5.14
系列:962305输入调节:STANDARD
JESD-30 代码:R-PDSO-G8JESD-609代码:e0
长度:4.9 mm逻辑集成电路类型:PLL BASED CLOCK DRIVER
最大I(ol):0.012 A湿度敏感等级:1
功能数量:1反相输出次数:
端子数量:8实输出次数:8
最高工作温度:85 °C最低工作温度:-40 °C
输出特性:3-STATE封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装等效代码:SOP8,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):245电源:3.3 V
传播延迟(tpd):0.35 ns认证状态:Not Qualified
Same Edge Skew-Max(tskwd):0.25 ns座面最大高度:1.75 mm
子类别:Clock Drivers最大供电电压 (Vsup):3.6 V
最小供电电压 (Vsup):3 V标称供电电压 (Vsup):3.3 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:30宽度:3.9 mm
最小 fmax:133.33 MHzBase Number Matches:1

MPC962305D-1H 数据手册

 浏览型号MPC962305D-1H的Datasheet PDF文件第2页浏览型号MPC962305D-1H的Datasheet PDF文件第3页浏览型号MPC962305D-1H的Datasheet PDF文件第4页浏览型号MPC962305D-1H的Datasheet PDF文件第5页浏览型号MPC962305D-1H的Datasheet PDF文件第6页浏览型号MPC962305D-1H的Datasheet PDF文件第7页 
Freescale Semiconductor, Inc.  
MOTOROLA  
Order number: MPC962305  
Rev 5, 08/2004  
SEMICONDUCTOR TECHNICAL DATA  
MPC962305  
MPC962309  
Low-Cost 3.3 V Zero Delay Buffer  
The MPC962309 is a zero delay buffer designed to distribute high-speed  
clocks. Available in a 16-pin SOIC or TSSOP package, the device accepts one  
reference input and drives nine low-skew clocks. The MPC962305 is the 8-pin  
version of the MPC962309 which drives five outputs with one reference input.  
The -1H versions of these devices have higher drive than the -1 devices and  
can operate up to 100/-133 MHz frequencies. These parts have on-chip PLLs  
which lock to an input clock presented on the REF pin. The PLL feedback is  
on-chip and is obtained from the CLOCKOUT pad.  
D SUFFIX  
8-LEAD SOIC PACKAGE  
CASE 751-06  
Features  
1:5 LVCMOS zero-delay buffer (MPC962305)  
1:9 LVCMOS zero-delay buffer (MPC962309)  
Zero input-output propagation delay  
Multiple low-skew outputs  
DT SUFFIX  
8-LEAD TSSOP PACKAGE  
CASE 948J-01  
250 ps max output-output skew  
700 ps max device-device skew  
Supports a clock I/O frequency range of 10 MHz to 133 MHz,  
compatible with CPU and PCI bus frequencies  
D SUFFIX  
16-LEAD SOIC PACKAGE  
CASE 751B-05  
Low jitter, 200 ps max cycle-cycle, and compatible with Pentium® based  
systems  
Test Mode to bypass PLL (MPC962309 only. See “Select Input Decoding”)  
8-pin SOIC or 8-pin TSSOP package (MPC962305);16-pin SOIC or 16-pin  
TSSOP package (MPC962309)  
Single 3.3 V supply  
Ambient temperature range: –40°C to +85°C  
Compatible with the CY2305, CY23S05, CY2309, CY23S09  
Spread spectrum compatible  
DT SUFFIX  
16-LEAD TSSOP PACKAGE  
CASE 948F-01  
Functional Description  
The MPC962309 has two banks of four outputs each, which can be con-  
trolled by the Select Inputs as shown in Table 3.Select Input Decoding for  
MPC962309. Bank B can be tri-stated if all of the outputs are not required. Select inputs also allow the input clock to be directly applied  
to the outputs for chip and system testing purposes.  
The MPC962305 and MPC962309 PLLs enters a power down state when there are no rising edges on the REF input. During this  
state, all of the outputs are in tristate, the PLL is turned off, and there is less than 25.0 µA of current draw for the device. The PLL  
shuts down in one additional case as shown in Table 3.Select Input Decoding for MPC962309.  
Multiple MPC962305 and MPC962309 devices can accept the same input clock and distribute it throughout the system. In this  
situation, the difference between the output skews of two devices will be less than 700 ps.  
All outputs have less than 200 ps of cycle-cycle jitter. The input-to-output propagation delay on both devices is guaranteed to be  
less than 350 ps and the output-to-output skew is guaranteed to be less than 250 ps.  
The MPC962305 and MPC962309 are available in two/three different configurations, as shown on the ordering information page.  
The MPC962305-1/MPC962309-1 are the base parts. High drive versions of those devices, MPC962305-1H and MPC962309-1H,  
are available to provide faster rise and fall times of the base device.  
For More Information On This Product,  
© Motorola, Inc. 2004  
Go to: www.freescale.com  

与MPC962305D-1H相关器件

型号 品牌 获取价格 描述 数据表
MPC962305D-1HR2 MOTOROLA

获取价格

Low-Cost 3.3 V Zero Delay Buffer
MPC962305D-1HR2 IDT

获取价格

Low-Cost, 3.3V Zero Delay Buffer
MPC962305D-1HR2 NXP

获取价格

IC,1:5 OUTPUT,SOP,8PIN,PLASTIC
MPC962305D-1R2 MOTOROLA

获取价格

Low-Cost 3.3 V Zero Delay Buffer
MPC962305D-1R2 NXP

获取价格

962305 SERIES, PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO8, 0.15
MPC962305D-1R2 IDT

获取价格

Low-Cost, 3.3V Zero Delay Buffer
MPC962305DT-1H MOTOROLA

获取价格

Low-Cost 3.3 V Zero Delay Buffer
MPC962305DT-1H IDT

获取价格

Low-Cost, 3.3V Zero Delay Buffer
MPC962305DT-1H NXP

获取价格

IC,1:5 OUTPUT,TSSOP,8PIN,PLASTIC
MPC962305DT-1HR2 MOTOROLA

获取价格

Low-Cost 3.3 V Zero Delay Buffer