Datasheet > MPC9608ACR2

MPC9608ACR2

更新时间： 2024-11-11 20:48:55

品牌	Logo	应用领域
恩智浦 - NXP		驱动输出元件逻辑集成电路
页数	文件大小	规格书
12页	315K
描述
9608 SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, 7 X 7 MM, LEAD FREE, PLASTIC, LQFP-32

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPC9608ACR2 技术参数

是否Rohs认证：	符合	生命周期：	Transferred
零件包装代码：	QFP	包装说明：	7 X 7 MM, LEAD FREE, PLASTIC, LQFP-32
针数：	32	Reach Compliance Code：	unknown
HTS代码：	8542.39.00.01	风险等级：	5.26
系列：	9608	输入调节：	STANDARD
JESD-30 代码：	S-PQFP-G32	JESD-609代码：	e3
长度：	7 mm	逻辑集成电路类型：	PLL BASED CLOCK DRIVER
最大I（ol）：	0.024 A	湿度敏感等级：	3
功能数量：	1	反相输出次数：
端子数量：	32	实输出次数：	10
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出特性：	3-STATE	封装主体材料：	PLASTIC/EPOXY
封装代码：	LQFP	封装等效代码：	QFP32,.35SQ,32
封装形状：	SQUARE	封装形式：	FLATPACK, LOW PROFILE
峰值回流温度（摄氏度）：	260	电源：	3.3 V
认证状态：	Not Qualified	Same Edge Skew-Max（tskwd）：	0.1 ns
座面最大高度：	1.6 mm	子类别：	Clock Drivers
最大供电电压 (Vsup)：	3.465 V	最小供电电压 (Vsup)：	3.135 V
标称供电电压 (Vsup)：	3.3 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	TIN	端子形式：	GULL WING
端子节距：	0.8 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	40	宽度：	7 mm
最小 fmax：	100 MHz	Base Number Matches：	1

MPC9608ACR2 数据手册

MPC9608

Rev 4, 10/2004

Freescale Semiconductor

Technical Data

1:10 LVCMOS Zero Delay

Clock Buffer

MPC9608

The MPC9608 is a 3.3 V compatible, 1:10 PLL based zero-delay buffer. With

a very wide frequency range and low output skews the MPC9608 is targeted for

high performance and mid-range clock tree designs.

LOW VOLTAGE 3.3 V

LVCMOS 1:10 ZERO-DELAY

CLOCK BUFFER

Features

•

1:10 outputs LVCMOS zero-delay buffer

Single 3.3 V supply

Supports a clock I/O frequency range of 12.5 to 200 MHz

Selectable divide-by-two for one output bank

Synchronous output enable control (CLK_STOP)

Output tristate control (output high impedance)

PLL bypass mode for low frequency system test purpose

Supports networking, telecommunications and computer applications

Supports a variety of microprocessors and controllers

Compatible to PowerQuicc I and II

FA SUFFIX

32-LEAD LQFP PACKAGE

CASE 873A-03

Ambient Temperature Range -40°C to +85°C

32-lead Pb-free Package Available

AC SUFFIX

32-LEAD LQFP PACKAGE

Pb-FREE PACKAGE

CASE 873A-03

Functional Description

The MPC9608 uses an internal PLL and an external feedback path to lock its

low-skew clock output phase to the reference clock phase, providing virtually

zero propagation delay. This enables nested clock designs with near-zero

insertion delay. Designs using the MPC9608 as PLL fanout buffer will show

significantly lower clock skew than clock distributions developed from traditional

fanout buffers. The device offers one reference clock input and two banks of 5 outputs for clock fanout. The input frequency and

phase is reproduced by the PLL and provided at the outputs. A selectable frequency divider sets the bank B outputs to generate

either an identical copy of the bank A clocks or one half of the bank A clock frequency. Both output banks remain synchronized

to the input reference for both bank B configurations.

Outputs are only disabled or enabled when the outputs are already in logic low state (CLK_STOP). For system test and

diagnosis, the MPC9608 outputs can also be set to high-impedance state by connecting OE to logic high level. Additionally, the

device provides a PLL bypass mode for low frequency test purpose. In PLL bypass mode, the minimum frequency and static

phase offset specification do not apply.

CLK_STOP and OE do not affect the PLL feedback output (QFB) and down stream clocks can be disabled without the internal

PLL losing lock.

The MPC9608 is fully 3.3 V compatible and requires no external components for the internal PLL. All inputs accept LVCMOS

signals while the outputs provide LVCMOS compatible levels with the capability to drive terminated 50 Ω transmission lines on

the incident edge. For series terminated transmission lines, each of the MPC9608 outputs can drive one or two traces giving the

devices an effective fanout of 1:20. The device is packaged in a 7x7 mm²32-lead LQFP package.

12 3 4 5 6 7...12

中文翻译

下载PDF

与MPC9608ACR2相关器件

型号	品牌	获取价格	描述	数据表
MPC9608FA	MOTOROLA	获取价格	PLL Based Clock Driver, 10 True Output(s), 0 Inverted Output(s), CMOS, PQFP32, 7 X 7 MM, L
MPC9608FA	NXP	获取价格	IC,1:10 OUTPUT,LV-CMOS,QFP,32PIN,PLASTIC
MPC9608FAR2	MOTOROLA	获取价格	PLL Based Clock Driver, 10 True Output(s), 0 Inverted Output(s), CMOS, PQFP32, 7 X 7 MM, L
MPC9608FAR2	IDT	获取价格	PLL Based Clock Driver, 9608 Series, 10 True Output(s), 0 Inverted Output(s), CMOS, PQFP32
MPC9608FAR2	NXP	获取价格	IC,1:10 OUTPUT,CMOS,QFP,32PIN,PLASTIC
MPC961C	MOTOROLA	获取价格	LOW VOLTAGE ZERO DELAY
MPC961CAC	IDT	获取价格	TQFP-32, Tray
MPC961CAC	NXP	获取价格	961 SERIES, PLL BASED CLOCK DRIVER, 17 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, PLAST
MPC961CACR2	IDT	获取价格	PLL Based Clock Driver, 961 Series, 17 True Output(s), 0 Inverted Output(s), PQFP32, PLAST
MPC961CACR2	NXP	获取价格	961 SERIES, PLL BASED CLOCK DRIVER, 17 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32, PLAST

与MPC9608ACR2相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

23
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

7
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

8
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

31

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9608ACR2

MPC9608ACR2 技术参数

MPC9608ACR2 数据手册

与MPC9608ACR2相关器件

与MPC9608ACR2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9608ACR2

MPC9608ACR2 技术参数

MPC9608ACR2 数据手册

与MPC9608ACR2相关器件

与MPC9608ACR2相关文章

您还可以找

您在本页遇到什么问题？