Datasheet > MPC9229FA

MPC9229FA

更新时间： 2024-11-19 21:14:59

品牌	Logo	应用领域
摩托罗拉 - MOTOROLA		时钟外围集成电路晶体
页数	文件大小	规格书
12页	180K
描述
Clock Generator, 400MHz, CMOS, PQFP32, LQFP-32

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MPC9229FA 技术参数

是否Rohs认证：	不符合	生命周期：	Transferred
包装说明：	TQFP, QFP32,.35SQ,32	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.77	JESD-30 代码：	S-PQFP-G32
长度：	7 mm	端子数量：	32
最高工作温度：	70 °C	最低工作温度：
最大输出时钟频率：	400 MHz	封装主体材料：	PLASTIC/EPOXY
封装代码：	TQFP	封装等效代码：	QFP32,.35SQ,32
封装形状：	SQUARE	封装形式：	FLATPACK, THIN PROFILE
峰值回流温度（摄氏度）：	NOT SPECIFIED	电源：	3.3 V
主时钟/晶体标称频率：	20 MHz	认证状态：	Not Qualified
座面最大高度：	1.2 mm	子类别：	Clock Generators
最大压摆率：	100 mA	最大供电电压：	3.465 V
最小供电电压：	3.135 V	标称供电电压：	3.3 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子形式：	GULL WING
端子节距：	0.8 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	7 mm
uPs/uCs/外围集成电路类型：	CLOCK GENERATOR, OTHER	Base Number Matches：	1

MPC9229FA 数据手册

Order Number: MPC9229/D

Rev 1 03/2003

MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

400 MHz Low Voltage PECL

Clock Synthesizer

MPC9229

The MPC9229 is a 3.3V compatible, PLL based clock synthesizer

targeted for high performance clock generation in mid-range to

high-performance telecom, networking and computing applications. With

output frequencies from 25 MHz to 400 MHz and the support of differential

PECL output signals the device meets the needs of the most demanding

clock applications.

400 MHZ LOW VOLTAGE

CLOCK SYNTHESIZER

Features

• 25 MHz to 400 MHz synthesized clock output signal

• Differential PECL output

• LVCMOS compatible control inputs

• On-chip crystal oscillator for reference frequency generation

• 3.3V power supply

• Fully integrated PLL

• Minimal frequency overshoot

• Serial 3-wire programming interface

• Parallel programming interface for power-up

• 32 lead LQFP and 28 PLCC packaging

• SiGe Technology

FN SUFFIX

28--LEAD PLCC PACKAGE

CASE 776

• Ambient temperature range 0°C to +70°C

• Pin and function compatible to the MC12429

Functional Description

FA SUFFIX

32 LEAD LQFP PACKAGE

CASE 873A

The internal crystal oscillator uses the external quartz crystal as the

basis of its frequency reference. The frequency of the internal crystal

oscillator is divided by 16 and then multiplied by the PLL. The VCO within

the PLL operates over a range of 800 to 1600 MHz. Its output is scaled by

a divider that is configured by either the serial or parallel interfaces. The

crystal oscillator frequency f

post-divider N determine the output frequency.

, the PLL feedback-divider M and the PLL

XTAL

The feedback path of the PLL is internal. The PLL adjusts the VCO output frequency to be 4⋅M times the reference frequency

by adjusting the VCO control voltage. Note that for some values of M (either too high or too low) the PLL will not achieve phase

lock. The PLL will be stable if the VCO frequency is within the specified VCO frequency range (800 to 1600 MHz). The M-value

must be programmed by the serial or parallel interface.

The PLL post-divider N is configured through either the serial or the parallel interfaces, and can provide one of four division

ratios (1, 2, 4, or 8). This divider extends performance of the part while providing a 50% duty cycle. The output driver is driven

differentially from the output divider, and is capable of driving a pair of transmission lines terminated 50Ω to V

– 2.0V. The

positive supply voltage for the internal PLL is separated from the power supply for the core logic and output drivers to minimize

noise induced jitter.

The configuration logic has two sections: serial and parallel. The parallel interface uses the values at the M[8:0] and N[1:0]

inputs to configure the internal counters. It is recommended on system reset to hold the P_LOAD input LOW until power becomes

valid. On the LOW–to–HIGH transition of P_LOAD, the parallel inputs are captured. The parallel interface has priority over the

serial interface. Internal pullup resistors are provided on the M[8:0] and N[1:0] inputs prevent the LVCMOS compatible control

inputs from floating.

The serial interface centers on a fourteen bit shift register. The shift register shifts once per rising edge of the S_CLOCK input.

The serial input S_DATA must meet setup and hold timing as specified in the AC Characteristics section of this document. The

configuration latches will capture the value of the shift register on the HIGH–to–LOW edge of the S_LOAD input. See the

programming section for more information. The TEST output reflects various internal node values, and is controlled by the T[2:0]

bits in the serial data stream. In order to minimize the PLL jitter, it is recommended to avoid active signal on the TEST output.

 Motorola, Inc. 2003

12 3 4 5 6 7...12

中文翻译

下载PDF

与MPC9229FA相关器件

型号	品牌	获取价格	描述	数据表
MPC9229FAR2	IDT	获取价格	Clock Generator, 400MHz, CMOS, PQFP32, LQFP-32
MPC9229FAR2	NXP	获取价格	400MHz, OTHER CLOCK GENERATOR, PQFP32, LQFP-32
MPC9229FN	IDT	获取价格	Clock Generator, 400MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9229FN	MOTOROLA	获取价格	Clock Generator, 400MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9229FNR2	MOTOROLA	获取价格	Clock Generator, 400MHz, CMOS, PQCC28, PLASTIC, LCC-28
MPC9229FNR2	NXP	获取价格	400MHz, OTHER CLOCK GENERATOR, PQCC28, PLASTIC, LCC-28
MPC9230	MOTOROLA	获取价格	800 MHz Low Voltage PECL Clock Synthesizer
MPC9230	IDT	获取价格	800MHz Low Voltage PECL Clock Synthesizer
MPC9230AC	IDT	获取价格	Clock Generator, 750MHz, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, O.80 MM PITCH, MS-02
MPC9230ACR2	NXP	获取价格	750MHz, OTHER CLOCK GENERATOR, PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LEAD FREE, MS-026BBA, LQF

与MPC9229FA相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

23
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

15
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

45
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

45

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9229FA

MPC9229FA 技术参数

MPC9229FA 数据手册

与MPC9229FA相关器件

与MPC9229FA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MPC9229FA

MPC9229FA 技术参数

MPC9229FA 数据手册

与MPC9229FA相关器件

与MPC9229FA相关文章

您还可以找

您在本页遇到什么问题？