MP725 Surface Mount Power Film Resistors
D-Pak Style Surface Mount Power Package including Metal Tab - 0.020 ohm to 1.00 Kohm
Use your thermal design experience with power semiconductors in
D-Pak style power packages. This experience will help you get the most out
of this unique family of surface mount power resistors. The thermal design
issues are the same where power handling capability is based on the case
temperature which is maintained in your design.
MP725 Surface Mount Power Film Resistors introduce our proven
Micronox® resistance film system in the widely accepted D-Pak style surface
mount power package. The non-inductive design makes this resistor ideal in
high frequency communications, power switching circuits, and snubbers.
The special performance features of our patented MP725 Surface Mount
Power Film Resistors include:
• D-Pak style power package for surface mount applications.
• Metal tab assists in post surface mount soldering inspection.
Specifications:
Resistance Tolerance: ±1% for 0.050Ω up to
1.00KΩ, ±5% for 0.020Ω up to 0.049Ω (5% and
• Resistance values to 0.020 ohm for current sense applications.
• Non-Inductive Design.
• Up to 25 Watt power rating at +25°C case temperature.
20% are available for most resistance values).
• Resistor element is electrically isolated from the metal heat sink tab.
Temperature Coefficient:
TC referenced to +25°C, ∆R taken at +150°C
0.50 ohm and above, -20 to +80 ppm/°C
0.050 ohm to 0.49 ohm, 0 to +200 ppm/°C
0.020 ohm to 0.049 ohm, 0 to +300 ppm/°C
Resistance
Dielect. Strength
RMSAC
Max.
Voltage
Power
Rating
Model No.
Terminal
V
Max.
Min.
MP725
25 Watts
200
1.00K
1,500
Solderable
0.020 Ω
*
Thermal Shock: Mil-Std-202, Method 107,
Cond. F, ∆R ±(0.5 percent + 0.0005 ohm) max.
DERATING CURVE
The case temperature is to be used for purposes of
establishing the maximum applied power. See Derating
Curve. The case temperature measurement is made on the
metal mounting tab against the molded body. Derate
appropriately for the ambient temperature range, the thermal
resistance of the mounting surface, and the temperature
limitations of the adjacent materials (such as glass epoxy).
*
100
Momentary Overload: 1.5 times rated power
with applied voltage not to exceed 1.5 times
maximum continuous operating voltage for 5
seconds, ∆R ±(0.5 percent + 0.0005 ohm) max.
80
60
40
20
0
Load Life: 2,000 hours at rated power, ∆R ±(1.0
percent + 0.0005 ohm). Power rating dependent
upon case temperature. See derating curve.
Derating ( thermal resistance ) is 0.200 W/°C ( 5.0°C/W ).
Power dissipation is 2.5 watts, at an ambient temperature of
25°C, when mounted on a double sided copper board (2 ounce,
G-10 or FR-4) 1 inch x 1 inch x .063 inch (thick).
25
100
150
Moisture Resistance: Mil-Std-202, Method 106,
∆R ±(0.5 percent + 0.0005 ohm) max.
CASE TEMPERATURE, °C
Shock: 100G, Mil-Std-202, Method 213,
Standard Resistance Values:
Cond. I, ∆R ±(0.4 percent + 0.0005 ohm) max.
Custom resistance values can be
manufactured for high quantity
applications. Please contact Caddock
Applications Engineering.
0.020 Ω 0.25 Ω
0.025 Ω 0.30 Ω
0.030 Ω 0.33 Ω
0.033 Ω 0.40 Ω
0.040 Ω 0.50 Ω
0.050 Ω 0.75 Ω
0.075 Ω 1.00 Ω
0.10 Ω 1.50 Ω
0.15 Ω 2.00 Ω
0.20 Ω 2.50 Ω
3.00 Ω 25.0 Ω 150 Ω
3.30 Ω 27.0 Ω 200 Ω
4.00 Ω 30.0 Ω 250 Ω
5.00 Ω 33.0 Ω 300 Ω
7.50 Ω 40.0 Ω 330 Ω
8.00 Ω 47.0 Ω 400 Ω
10.0 Ω 50.0 Ω 470 Ω
12.0 Ω 56.0 Ω 500 Ω
15.0 Ω 75.0 Ω 560 Ω
20.0 Ω 100 Ω 750 Ω
120 Ω 1.00 K
Vibration, High Frequency: Mil-Std-202,
Method 204, Cond. D, ∆R ±(0.4 percent
+ 0.0005 ohm) max.
Terminal Strength: Mil-Std-202, Method 211,
Cond. A (Pull Test) 5 lbs., ∆R ±(0.2 percent
+ 0.0005 ohm) max.
Measurement Note:
For the specifications, resistance
measurement shall be made at the
foot of surface mount formed terminal.
Insulation Resistance: 10,000 Megohms min.
The resistor is electrically isolated from the metal tab.
FOOTPRINT FOR
SOLDERABLE CONTACT AREA
DWV: The dielectric strength rating of
1500 VrmsAC is based upon connections made
between terminals shorted and either the metal
surface the part is mounted to or a metal clip in
contact with the top surface of the part.
.310
(7.87)
PACKAGE DIMENSIONS
.320 ±.010
(8.13 ±.26)
.110 ±.010
(2.79 ±.26)
.335
(8.51)
Scale:
.040 ±.018
(1.02 ±.46)
.250
(6.35)
Packaging Note:
.032 ±.003
(.81 ±.08)
.275
1.5X
Quantities of 250 pieces or greater will be
supplied in tape and reel packaging. The full reel
quantity is 1250 pieces.
.070
(1.78)
(6.99)
Heat sink
height
.325 ±.020
(8.26 ±.51)
MP 725
10.0
1%
.150
(3.81)
.053 ± .007
(1.35 ± .18)
.160 ±.010
(4.06 ±.26)
.100
(2.54)
.100
(2.54)
.030 ± .004
(.76 ± .10)
Ordering Information:
.200 ±.010
(5.08 ±.26)
.070 ±.010
(1.78 ±.26)
.065
(1.65)
.065
(1.65)
.058 ±.007
(1.47 ±.18)
MP725 - 10.0 - 1%
.025 ±.004
(.64 ±.10)
Soldering Note: During surface mount
soldering the soldering temperature profile
must not cause the metal tab of this
device to exceed 220°C.
Model Number:
Tolerance
Resistor Value:
Dimensions in inches and (millimeters)
Sales and Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
ELECTRONICS, INC.
For Caddock Distributors listed by country see caddock.com/contact/dist.html
e-mail: caddock@caddock.com • web: www.caddock.com
Fax: (541) 496-0408
© 2003-2017 Caddock Electronics, Inc.
28_IL101.0717
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
