4
3
2
1
REVISIONS
DESCRIPTION
INITIAL RELEASE
PART
NO.
INTERFACE
Ø A
.265 .001
REV.
-
DATE
4/9/2012
BY
YP
TMP® MALE
INTERFACE
-1CC
-2CC
-3CC
-4CC
FULL DETENT
LIMITED DETENT
SMOOTH BORE
CATCHER'S MITT
.172
.176
.180
.180
A
D
C
B
A
D
C
B
A
.217 .001
.295
.265
A
.317 .001
RP
.092
.025
TMP® MALE
INTERFACE
.192
.025
.092
.036
-4CC ONLY
(CATCHER'S MITT)
.177
.076
TMP® is a registered trademark of Carlisle IT.
M A T E R I A L ( S ) :
E L E C T R I C A L ( S ) :
Impedance: 50 Ohms Nominal
M E C H A N I C A L ( S ) :
E N V I R O N M E N T A L ( S ) :
Body & Center Conductor:
Brass Alloy per ASTM B-16
Insulator:
Interface Dimensions:
Consult Factory
Connector Durability:
Consult Factory
Center Contact Retention:
2 lbs min. axial
N/A Radial
Temperature Range: -65°C to +165°C
Thermal Shock:
MIL-STD-202, Method 107, Test Condition B
Moisture Resistance:
Frequency Range: DC to 18.0 GHz
VSWR: 1.10 + .02 f(GHz)
Insertion Loss: .07 x f (GHz) dB
Working Voltage: 325 Vrms max @ Sea Level
Dielectric Withstand Voltage: 1,000 Vrms min.
RF HiPot Voltage: 670 Vrms min. @ 5MHz
Corona Level: 250 Vrms @ 70,000 ft
Insulation Resistance: 5,000 MegOhms min.
RF Leakage: -(90-fGHz)dB
Torlon per AMS 3670 or ASTM D-5204
MIL-STD-202, Method 106, Insulation resistance
at least 200 MegaOhms within 5 minutes after
removal from humidity.
Corrosion:
Force to Engage & Disengage:
Consult Factory
MIL-STD-202, Method 101, Test Condition B
Vibration:
MIL-STD-202, Method 204, Test Condition D
Shock:
Contact Resistance:
Center Conductor:
MIL-STD-202, Method 213, Test Condition I
Before Environment: 3.0 Milliohms
After Environment: 4.0 Milliohms
TOLERANCES AND NOTES
APPLICABLE CARLISLE IT DOCUMENTS
F I N I S H ( E S ) :
EXCEPT AS NOTED
-
-
-
DIMENSIONS ARE IN INCHES.
.XX ±.015
ASSY INSTRUC
WORK STANDARD PROD INSTRUC
ANGULAR ± 1/2°
MATERIAL
SPECIFICATION
PROCUREMENT
LINEAR
.XXX ±.005
Body & Center Conductor:
Gold plate per ASTM B-488 over Nickel plate per SAE AMS-QQ-N-290
NA
-
NA
NA
FRACTION ± 1/32
APPROVAL INITIALS
DATE
Interconnect Technologies
1. MACHINE FINISH: 63 RMS
YPHAN
DRAWN BY
CHECKED BY
4.9.12
CARLISLE Cerritos, CA 90703
2. BREAK ALL SHARP EDGES .003 MAX.
HN
N
O
T
I
C
E
4.10.12
TITLE
THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETARY DESIGN
ORIGINATED BY CARLISLE INTERCONNECT TECHNOLOGIES & ALL
DESIGN, MANUFACTURING, REPRODUCTION, USE & SALE RIGHTS
REGARDING THE SAME ARE EXPRESSLY RESERVED. IT IS SUBMITTED
UNDER A CONFIDENTIAL RELATIONSHIP FOR A SPECIFIED
PURPOSE & THE RECIPIENT AGREES BY ACCEPTING THIS DRAWING
NOT SUPPLY OR DISCLOSE ANY INFORMATION REGARDING IT TO
ANY UNAUTHORIZED PERSON TO INCORPORATE IN OTHER PROJECTS ANY
SPECIAL FEATURES PECULIAR TO THIS DESIGN. ALL PATENT RIGHTS
HERETO ARE EXPRESSLY RESERVED BY CARLISLE
INTERCONNECT TECHNOLOGIES, CERRITOS, CALIFORNIA 90703.
MACHINED FILLETS .005 MAX.
3.
TMP® MALE TO R/A TERMINATION,
TEST ENGR
QUALITY
-
-
4. MACHINED SURFACES SQUARE TO RESPECT-
IVE AXIS WITHIN .005 INCHES PER INCH.
SURFACE MOUNT
-
-
5. MACHINED DIAMETERS CONCENTRIC
SCALE
SUB-DIRECTORY/
WITHIN .002 T.I.R.
DESIGN ENG
6. DIMENSIONS TO BE MET BEFORE PLATING.
7. CHAMFER ALL THREADS 45°.
PCV
3.28.12
_OL/
8:1
SHEET
OF
1
1
8. THREADS PER H-28
-
-
SIZE CAGE CODE DRAWING NO.
REV.
-
-
MFG. ENGR
ECO APPRV
REMOVE FRAYED EDGES ON TEFLON.
9.
-
10. REMOVE ALL BURRS.
C 30990
MP703
ENG-SW REV. E
4
3
2
1