MP5010A

更新时间： 2024-01-23 18:32:57

品牌	Logo	应用领域
芯源 - MPS		开关
页数	文件大小	规格书
15页	808K
描述
3V-18V, 1A-5A Programmable-Current- Limit Switch with Over-Voltage Clamp

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MP5010A 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
风险等级：	5.59	其他特性：	UL RECOGNIZED
最小击穿电压：	1000 V	配置：	BRIDGE, 4 ELEMENTS
二极管元件材料：	SILICON	二极管类型：	BRIDGE RECTIFIER DIODE
JESD-30 代码：	S-PUFM-W4	湿度敏感等级：	1
最大非重复峰值正向电流：	450 A	元件数量：	4
相数：	1	端子数量：	4
最高工作温度：	150 °C	最低工作温度：	-50 °C
最大输出电流：	50 A	封装主体材料：	PLASTIC/EPOXY
封装形状：	SQUARE	封装形式：	FLANGE MOUNT
峰值回流温度（摄氏度）：	NOT SPECIFIED	最大重复峰值反向电压：	1000 V
表面贴装：	NO	端子形式：	WIRE
端子位置：	UPPER	处于峰值回流温度下的最长时间：	NOT SPECIFIED
Base Number Matches：	1

MP5010A 数据手册

MP5010A

3Vꢀ18V, 1Aꢀ5A ProgrammableꢀCurrentꢀ

Limit Switch with OverꢀVoltage Clamp

DESCRIPTION

FEATURES

The MP5010A is a protection device designed to

protect circuitry on the output (source) from

transients on the input (V_CC). It also protects the

input from undesired shorts and transients

coming from the source.

•

Wide 3Vꢀtoꢀ18V Operating Input Range

5.7V Output OverꢀVoltage Clamp

Integrated 40mꢁ Power FET

Enable/Fault Pin

Adjustable Output Voltage Slew Rate

Adjustable Current Limit

A small capacitor on the dv/dt pin controls the

slew rate that limit the inrush current at the

source. For instance, a 1nF capacitor results in a

source rampꢀup time of 3ms.

Thermal Protection

APPLICATIONS

The maximum load at the source is current

limited using a sense FET topology. An external

resistor between the IꢀLimit pin and the Source

pins controls the magnitude of the current limit.

•

HotꢀSwappable Devices

Wireless Modem Data Cards

PC Cards

Laptops

An internal charge pump drives the gate of the

power device, allowing the DMOS power FET to

have a very low ONꢀresistance of just 40mꢁ.

All MPS parts are leadꢀfree and adhere to the RoHS directive. For MPS green

status, please visit MPS website under Products, Quality Assurance page.

“MPS” and “The Future of Analog IC Technology” are Registered Trademarks

of Monolithic Power Systems, Inc.

The MP5010A also protects the source from the

input being too low or too high. Underꢀvoltage

lockout ensures that the input remains above the

minimum operating threshold before the power

device turns on. If the input rises above the high

output threshold, the MP5010A limits the source

voltage.

TYPICAL APPLICATION

MP5010A Rev. 1.0

2/7/2013

www.MonolithicPower.com

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

12 3 4 5 6 7...15

下载PDF

与MP5010A相关器件

型号	品牌	描述	获取价格	数据表
MP5010ADQ	MPS	3V-18V, 1A-5A Programmable-Current- Limit Switch with Over-Voltage Clamp	获取价格
MP5010ADQ-LF-Z	MPS	Buffer/Inverter Based Peripheral Driver	获取价格
MP5010B	MPS	3V-18V, 1A-5A Programmable-Current- Limit Switch with Over-Voltage Clamp	获取价格
MP5010BDQ	MPS	3V-18V, 1A-5A Programmable-Current- Limit Switch with Over-Voltage Clamp	获取价格
MP5010BDQ-LF	MPS	暂无描述	获取价格
MP5010BDQ-LF-Z	MPS	暂无描述	获取价格