MP4315
45V, 5A, Low IQ, Synchronous Step-Down
Converter with Frequency Spread Spectrum
and Power Good Indication
DESCRIPTION
FEATURES
The MP4315 is a synchronous step-down
switching converter with configurable
Wide 3.3V to 45V Operating Voltage Range
5A Continuous Output Current
1.7μA Low Shutdown Supply Current
18μA Sleep Mode Quiescent Current
Internal 48mΩ High-Side MOSFET and
20mΩ Low-Side MOSFET
350kHz to 1000kHz Configurable Switching
Frequency for Car Battery Applications
Can Be Synchronized to an External Clock
Out-of-Phase Synchronized Clock Output
Frequency Spread Spectrum (FSS) for Low
EMI
Symmetric VIN for Low EMI
Power Good Output
External Soft Start
100ns Minimum On Time
Selectable Advanced Asynchronous Mode
(AAM) or Forced Continuous Conduction
Mode (FCCM)
a
frequency, as well as an integrated internal high-
side MOSFET (HS-FET) and low-side MOSFET
(LS-FET). The device provides up to 5A of highly
efficient output with current mode control for fast
loop response.
The wide 3.3V to 45V input voltage range
accommodates
a
variety of step-down
applications in automotive input environments.
The MP4315’s low 1.7μA shutdown mode
quiescent current makes the device well-suited
for battery-powered applications.
High power conversion efficiency across a wide
load range is achieved by scaling down the
switching frequency under light-load conditions
to reduce the switching and gate driver losses.
An open-drain power good signal indicates
whether the output is within 93% to 106% of its
nominal voltage.
Low-Dropout Mode
Hiccup Over-Current Protection
Available in a QFN-20 (4mmx4mm)
Package
Frequency foldback helps prevent inductor
current runaway during start-up. Thermal
shutdown provides reliable, fault-tolerant
operation. High-duty cycle and low-dropout
mode are provided for the automotive cold crank
conditions.
Available in a Wettable Flank Package
APPLICATIONS
Radios
The MP4315 is available in a QFN-20
(4mmx4mm) wettable flank package.
Battery Power Systems
General Purpose Consumer Applications
Industrial Power Systems
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP4315 Rev. 1.0
7/22/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1