MP28310
300mA, 2V to 5.5V, 500nA IQ, Step-Down
Converter with 300nA IQ, 2V to 5.5V, 100mA
LDO Regulator in CSP-12 (1.2mmx1.6mm)
DESCRIPTION
FEATURES
The MP28310 is
a
monolithic power
300mA Buck Converter
management unit containing a 300mA, high-
efficiency, switching step-down converter and a
100mA low-dropout (LDO) regulator. The ultra-
low 500nA quiescent current (IQ) provides
extremely high efficiency when the load current
is within the µA range. The MP28310’s low 2V
minimum input voltage allows the system to
operate directly from the battery.
o Ultra-Low 500nA Quiescent Current (IQ)
o Wide 2V to 5.5V Operating Input Range
o 7 Selectable Output Voltages
o Up to 300mA of Output Current
o 1.5MHz Switching Frequency in
Continuous Conduction Mode (CCM)
o 100% Duty Cycle in Low-Dropout Mode
o 0.25Ω and 0.25Ω Internal Power
MOSFET Switches
o Cycle-by-Cycle Over-Current Protection
(OCP)
o Short-Circuit Protection (SCP) with
Hiccup Mode
Constant-on-time (COT) control provides fast
transient response and high light-load efficiency,
and requires minimal capacitance. Good
regulation is achieved by integrating an error
amplifier (EA) to correct the output voltage
(VOUT).
100mA LDO
o Ultra-Low 300nA IQ
The 100mA LDO regulator provides easy system
configuration and a clean VOUT. The control
(CTRL) pins control the on/off and VOUT selection
functions.
o 2V to 5.5V Operating Input Range
o 3 Selectable Output Voltages
o Over-Temperature Protection (OTP)
Available in a CSP-12 (1.2mmx1.6mm)
Package
Fault protection features include under-voltage
lockout (UVLO), over-current protection (OCP),
and thermal shutdown.
APPLICATIONS
Wearables
The MP28310 requires a minimal number of
readily available, standard external components,
Internet of Things (IoT)
Portable Instruments
Battery-Powered Devices
and is available in
(1.2mmx1.6mm) package.
a
small CSP-12
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
TYPICAL APPLICATION
VOUT1
1.8V/300mA
=
Efficiency vs. Load Current
VOUT = 1.8V
VIN1 = 3.6V
L1
2.2µH
VIN1
SW1
CIN1
COUT1
10µF
10µF
OUT1
CTRL1
CTRL2
CTRL3
PG1
MP28310GC
VOUT2
1.8V/100mA
=
VIN2 = 3.6V
VIN2
OUT2
CIN2
1µF
COUT2
1µF
CTRL4
CTRL5
GND
MP28310 Rev. 1.0
12/23/2020
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.
1