5秒后页面跳转
MPX4100A PDF预览

MPX4100A

更新时间: 2024-02-11 21:27:37
品牌 Logo 应用领域
摩托罗拉 - MOTOROLA 传感器换能器压力传感器
页数 文件大小 规格书
8页 138K
描述
INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

MPX4100A 技术参数

生命周期:TransferredReach Compliance Code:unknown
ECCN代码:EAR99风险等级:5.81
Is Samacsys:N最大精度 (%):1.8%
其他特性:TEMPERATURE COMPENSATED, SIGNAL CONDITION主体宽度:16.25 mm
主体高度:19.05 mm主体长度或直径:27.94 mm
外壳:PLASTIC线性度 (%):1.8 %
安装特点:THROUGH HOLE MOUNT标称偏移:0.30V
最大工作电流:10 mA最高工作温度:125 °C
最低工作温度:-40 °C输出范围:0.30-4.90V
输出类型:ANALOG VOLTAGE封装形状/形式:ROUND
端口类型:BARBED最大压力范围:15.2 Psi
最小压力范围:2.9 Psi压力传感模式:ABSOLUTE
响应时间:1000 µs灵敏度(mV / V):54 mV/V
传感器/换能器类型:PRESSURE SENSOR,PEIZORESISTIVE最大供电电压:5.35 V
最小供电电压:4.85 V表面贴装:NO
端接类型:SOLDERBase Number Matches:1

MPX4100A 数据手册

 浏览型号MPX4100A的Datasheet PDF文件第2页浏览型号MPX4100A的Datasheet PDF文件第3页浏览型号MPX4100A的Datasheet PDF文件第4页浏览型号MPX4100A的Datasheet PDF文件第5页浏览型号MPX4100A的Datasheet PDF文件第6页浏览型号MPX4100A的Datasheet PDF文件第7页 
Order this document  
by MPX4100/D  
SEMICONDUCTOR TECHNICAL DATA  
INTEGRATED  
PRESSURE SENSOR  
20 to 105 kPa (2.9 to 15.2 psi)  
0.3 to 4.9 V Output  
The Motorola MPX4100 series Manifold Absolute Pressure (MAP) sensor for engine  
control is designed to sense absolute air pressure within the intake manifold. This  
measurement can be used to compute the amount of fuel required for each cylinder. The  
small form factor and high reliability of on–chip integration makes the Motorola MAP  
sensor a logical and economical choice for automotive system designers.  
Features  
1.8% Maximum Error Over 0° to 85°C  
Specifically Designed for Intake Manifold Absolute Pressure Sensing in Engine  
Control Systems  
Ideally Suited for Microprocessor Interfacing  
Patented Silicon Shear Stress Strain Gauge  
Temperature Compensated Over 40°C to +125°C  
Durable Epoxy Unibody Element  
BASIC CHIP CARRIER  
ELEMENT  
CASE 867–08, STYLE 1  
Ideal for Non–Automotive Applications  
PIN NUMBER  
1
2
3
V
4
5
6
N/C  
N/C  
N/C  
Application Examples  
out  
Gnd  
Manifold Sensing for Automotive Systems  
V
S
NOTE: Pins 4, 5, and 6 are internal  
device connections. Do not connect  
to external circuitry or ground. Pin 1  
is noted by the notch in the Lead.  
V
S
3
The MPX4100 series piezoresistive transducer is a state–  
of–the–art, monolithic, signal conditioned, silicon pressure  
sensor. This sensor, with its patented transducer, combines  
advanced micromachining techniques, thin film metallization,  
and bipolar semiconductor processing to provide an  
accurate, high level analog output signal that is proportional  
to applied pressure.  
THIN FILM  
TEMPERATURE  
COMPENSATION  
AND  
GAIN STAGE #2  
AND  
GROUND  
REFERENCE  
SHIFT CIRCUITRY  
X–ducer  
SENSING  
ELEMENT  
1
V
out  
GAIN STAGE #1  
Figure 1 shows a block diagram of the internal circuitry in-  
tegrated on a pressure sensor chip.  
2
PINS 4, 5 AND 6 ARE NO CONNECTS  
GND  
Figure 1. Fully Integrated Pressure Sensor Schematic  
Senseon and X–ducer are trademarks of Motorola, Inc.  
REV 3  
Motorola, Inc. 1997  

与MPX4100A相关器件

型号 品牌 描述 获取价格 数据表
MPX4100AC6U MOTOROLA Micro Peripheral IC

获取价格

MPX4100AP FREESCALE INTEGRATED PRESSURE SENSOR

获取价格

MPX4100AP MOTOROLA INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

获取价格

MPX4100AP NXP UNIBODY COMPENSATED

获取价格

MPX4100AP1 NXP PEIZORESISTIVE PRESSURE SENSOR

获取价格

MPX4100AS MOTOROLA INTEGRATED PRESSURE SENSOR 20 to 105 kPa (2.9 to 15.2 psi) 0.3 to 4.9 V Output

获取价格