5秒后页面跳转
MPX2100GP PDF预览

MPX2100GP

更新时间: 2024-01-18 02:35:15
品牌 Logo 应用领域
摩托罗拉 - MOTOROLA /
页数 文件大小 规格书
10页 197K
描述
0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)

MPX2100GP 技术参数

生命周期:ObsoleteReach Compliance Code:unknown
风险等级:5.78Is Samacsys:N
其他特性:TEMPERATURE COMPENSATED主体宽度:16.25 mm
主体高度:19.05 mm主体长度或直径:29.46 mm
安装特点:THROUGH HOLE MOUNT标称偏移:0MV
最大工作电流:6 mA最高工作温度:125 °C
最低工作温度:-40 °C输出范围:0-40mV
输出类型:ANALOG VOLTAGE端口类型:BARBED
最大压力范围:14.5 Psi最小压力范围:
压力传感模式:GAGE响应时间:1000 µs
灵敏度(mV / V):0.4 mV/V传感器/换能器类型:PRESSURE SENSOR,PEIZORESISTIVE
最大供电电压:16 V最小供电电压:10 V
表面贴装:NO端接类型:SOLDER
Base Number Matches:1

MPX2100GP 数据手册

 浏览型号MPX2100GP的Datasheet PDF文件第2页浏览型号MPX2100GP的Datasheet PDF文件第3页浏览型号MPX2100GP的Datasheet PDF文件第4页浏览型号MPX2100GP的Datasheet PDF文件第5页浏览型号MPX2100GP的Datasheet PDF文件第6页浏览型号MPX2100GP的Datasheet PDF文件第7页 
Order this document  
by MPX2100/D  
SEMICONDUCTOR TECHNICAL DATA  
Motorola Preferred Device  
0 to 100 kPa (0 to 14.5 psi)  
40 mV FULL SCALE SPAN  
(TYPICAL)  
The MPX2100 and MPX2101 series device is a silicon piezoresistive pressure sensors  
providing a highly accurate and linear voltage output — directly proportional to the  
applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain  
gauge and a thin–film resistor network integrated on–chip. The chip is laser trimmed for  
precise span and offset calibration and temperature compensation.  
Features  
Temperature Compensated Over 0°C to +85°C  
Unique Silicon Shear Stress Strain Gauge  
Easy to Use Chip Carrier Package Options  
Available in Absolute, Differential and Gauge Configurations  
Ratiometric to Supply Voltage  
BASIC CHIP  
CARRIER ELEMENT  
CASE 344–15, STYLE 1  
±0.25% Linearity (MPX2100D)  
Application Examples  
Pump/Motor Controllers  
Robotics  
Level Indicators  
Medical Diagnostics  
Pressure Switching  
Barometers  
Altimeters  
Figure 1 illustrates a block diagram of the internal circuitry on the stand–alone  
pressure sensor chip.  
DIFFERENTIAL  
PORT OPTION  
V
S
3
CASE 344C–01, STYLE 1  
THIN FILM  
TEMPERATURE  
COMPENSATION  
AND  
CALIBRATION  
CIRCUITRY  
NOTE: Pin 1 is the notched pin.  
2
4
X–ducer  
SENSING  
ELEMENT  
V
out+  
PIN NUMBER  
V
out–  
1
2
Gnd  
+V  
3
4
V
S
–V  
out  
out  
1
GND  
Figure 1. Temperature Compensated Pressure Sensor Schematic  
VOLTAGE OUTPUT versus APPLIED DIFFERENTIAL PRESSURE  
The differential voltage output of the X–ducer is directly proportional to the differential  
pressure applied.  
The absolute sensor has a built–in reference vacuum. The output voltage will decrease  
as vacuum, relative to ambient, is drawn on the pressure (P1) side.  
The output voltage of the differential or gauge sensor increases with increasing  
pressure applied to the pressure (P1) side relative to the vacuum (P2) side. Similarly,  
output voltage increases as increasing vacuum is applied to the vacuum (P2) side  
relative to the pressure (P1) side.  
Preferred devices are Motorola recommended choices for future use and best overall value.  
Senseon and X–ducer are trademarks of Motorola, Inc.  
REV 6  
Motorola, Inc. 1997  

与MPX2100GP相关器件

型号 品牌 描述 获取价格 数据表
MPX2100GS MOTOROLA 0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)

获取价格

MPX2100GSX MOTOROLA 0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)

获取价格

MPX2100GSX FREESCALE 100kPa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors

获取价格

MPX2100GVP FREESCALE 100 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors

获取价格

MPX2100GVP MOTOROLA 0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)

获取价格

MPX2100GVS MOTOROLA 0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)

获取价格