Order this document
by MOC8106/D
SEMICONDUCTOR TECHNICAL DATA
[CTR = 50–150%]
GlobalOptoisolator
[CTR = 100–300%]
[CTR = 250–600%]
The MOC8106, MOC8107 and MOC8108 devices consist of a gallium
arsenide LED optically coupled to a silicon phototransistor in a dual–in–line
package.
STYLE 3 PLASTIC
•
•
Closely Matched Current Transfer Ratio (CTR) Minimizes Unit–to–Unit Variation
Narrow (CTR) Windows that translate to a Narrow and Predictable Open Loop Gain
Window
•
•
Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for
Minimum Noise Susceptibility
6
1
STANDARD THRU HOLE
CASE 730A–04
To order devices that are tested and marked per VDE 0884 requirements, the
suffix “V” must be included at end of part number. VDE 0884 is a test option.
Applications
•
•
•
Switchmode Power Supplies (Feedback Control)
AC Line/Digital Logic Isolation
SCHEMATIC
Interfacing and coupling systems of different potentials and impedances
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
A
NC
1
2
3
6
5
Rating
Symbol
Value
Unit
INPUT LED
Forward Current — Continuous
Forward Current — Peak (PW = 100 µs, 120 pps)
Reverse Voltage
I
F
60
1
mA
A
4
NC
I (pk)
F
PIN 1. ANODE
V
6
Volts
R
D
2. CATHODE
3. NO CONNECTION
4. EMITTER
LED Power Dissipation @ T = 25°C
P
120
1.41
mW
mW/°C
A
Derate above 25°C
5. COLLECTOR
6. NO CONNECTION
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector Current — Continuous
V
V
70
7
Volts
Volts
mA
CEO
ECO
I
C
150
Detector Power Dissipation @ T = 25°C
Derate above 25°C
P
D
150
1.76
mW
mW/°C
A
TOTAL DEVICE
(1)
Input–Output Isolation Voltage
(f = 60 Hz, t = 1 sec.)
V
ISO
7500
Vac(pk)
Total Device Power Dissipation @ T = 25°C
Derate above 25°C
P
D
250
2.94
mW
mW/°C
A
(2)
Ambient Operating Temperature Range
T
–55 to +100
–55 to +150
260
°C
°C
°C
A
(2)
Storage Temperature Range
T
stg
Lead Soldering Temperature
T
L
(1/16″ from case, 10 sec. duration)
1. Input–Output Isolation Voltage, V
, is an internal device dielectric breakdown rating.
ISO
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 3
Motorola Optoelectronics Device Data
1
Motorola, Inc. 1997