MOC3020 THRU MOC3023
OPTOCOUPLERS/OPTOISOLATORS
SOES025 – OCTOBER 1986 – REVISED OCTOBER 1995
MOC3020 – MOC3023 . . . PACKAGE
(TOP VIEW)
• 250 V Phototriac Driver Output
• Gallium-Arsenide-Diode Infrared Source and
Optically-Coupled Silicon Traic Driver
(Bilateral Switch)
ANODE
CATHODE
NC
MAIN TERM
1
2
3
6
5
4
†
TRIAC SUB
MAIN TERM
• UL Recognized . . . File Number E65085
• High Isolation . . . 7500 V Peak
• Output Driver Designed for 220 V ac
• Standard 6-Terminal Plastic DIP
†
Do not connect this terminal
NC – No internal connection
• Directly Interchangeable with
Motorola MOC3020, MOC3021, MOC3022,
and MOC3023
logic diagram
• Direct Replacements for:
– TRW Optron OPI3020, OPI3021,
OPI3022, and OPI3023;
1
2
6
4
– General Instrument MCP3020,
MCP3021, and MCP3022;
– General Electric GE3020,
GE3021, GE3022, and GE3023
†
absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)
Input-to-output peak voltage, 5 s maximum duration, 60 Hz (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . 7.5 kV
Input diode reverse voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 V
Input diode forward current, continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Output repetitive peak off-state voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 V
Output on-state current, total rms value (50-60 Hz, full sine wave):T = 25°C . . . . . . . . . . . . . . . . . . . 100 mA
A
T = 70°C . . . . . . . . . . . . . . . . . . . . 50 mA
A
Output driver nonrepetitive peak on-state current (t = 10 ms, duty cycle = 10%, see Figure 7) . . . . . . 1.2 A
w
Continuous power dissipation at (or below) 25°C free-air temperature:
Infrared-emitting diode (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW
Phototriac (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mW
Total device (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 mW
Operating junction temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 100°C
J
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 150°C
stg
Lead temperature 1,6 (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Input-to-output peak voltage is the internal device dielectric breakdown rating.
2. Derate linearly to 100°C free-air temperature at the rate of 1.33 mW/°C.
3. Derate linearly to 100°C free-air temperature at the rate of 4 mW/°C.
4. Derate linearly to 100°C free-air temperature at the rate of 4.4 mW/°C.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
7–1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265