MMW Series
Single and Dual Output
4:1 Input Voltage Range
25~30 Watt DC/DC Converter
Rev C
FEATURES
● Soft Start
● Output Trim
● RoHS Compliant
● Six-Sided Shielding
● Efficiency up to 89%
● Single & Dual Outputs
● Remote On/Off Control
● MTBF > 1,000,000 Hours
● Low Profile: 0.37” (9.3mm)
● CSA1950 Safety Approval
● UL60950-1 Safety Approvals
● 4:1 Wide Input Voltage Range
● Complies with EN55022 Class A
● Short Circuit, Over Voltage, and Over Temperature Protected
DESCRIPTION
The MMW series power modules are low-profile dc/dc converters that offer up to 30 watts of output power in a 2 x 1.6 x 0.37 inch package.
These converters operate over input voltage ranges of 10-40VDC and 18-75VDC. This series also provides regulated single and dual
output voltages of 3.3, 5, 12, 15, ±12 and ±15VDC. Other features include remote on/off control, output trim function, six-sided shielding,
and efficiencies up to 89%. All models are over voltage, over temperature and short circuit protected. The EN55022 Class A conducted
noise compliance minimizes design time, cost, and eliminates the need for external filter components. These converters have UL60950-1
approvals and are best suited for data communication equipment, distributed power systems, telecommunications equipment, mixed
analog/digital subsystems, process/machine control equipment, computer peripheral systems, and industrial robot systems.
SPECIFICATIONS: MMW Series
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT (Vin)
TEST CONDITIONS
Min
Nom
Max
Unit
24V nominal input models
48V nominal input models
24V nominal input models
48V nominal input models
24V nominal input models
48V nominal input models
All models
10
18
9.4
17
9
24
48
9.7
17.5
9.3
16.5
40
75
10
18
9.5
17
VDC
VDC
VDC
VDC
VDC
VDC
A
mW
VDC
VDC
Input Voltage Range
Start Voltage
Under Voltage Shutdown
16
Reverse Polarity Input Current
Short Circuit Input Power
2
4500
50
100
24V nominal input models
48V nominal input models
-0.7
-0.7
Input Surge Voltage
Input Filter
Pi Filter
OUTPUT (Vo)
Output Voltage Range
Output Voltage Accuracy
Output Voltage Balance
Output Trim
Load Regulation
Line Regulation
See Rating Chart
±0.5
±0.5
±10.0
±0.3
±0.2
±1.0
±2.0
±11.0
±1.0
±0.5
30
%
%
%
%
%
W
Dual Outputs, Balanced Loads
% of nominal output
Io = 50% to 100%
±9.0
Vin = min. to max.
Output Power
Output Current Range
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Transient Recovery Time
Transient Response Deviation
REMOTE ON/OFF
Supply On
See Rating Chart
55
80
100
10
mVpk-pk
mVpk-pk
mVrms
μs
Over Line, Over Load, and Over Temperature
25% load step change
150
±2
300
±4
%
2.5 to 100VDC or Open Circuit
1
Supply Off
-1
VDC
mA
μA
Standby Input Current
Control Input Current (On)
Control Input Current (Off)
Control Common
2
5
5
Vin – RC = 5.0V
Vin – RC = 0V
-100
μA
Referenced to negative input
PROTECTION
Over Power Protection
Short Circuit Protection
Over Voltage Protection
120
180
Continuous
See Rating Chart
%
24V nominal input models
48V nominal input models
5000mA slow-blow type
3000mA slow-blow type
Input Fuse Recommendation
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
11/14/2011
Page 1 of 8