NOTES:
REVISION DN
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 2 LB.
OPTION
3. FOR NON -LC & -A, USE 2TS-XX-D.
-TR: TAPE AND REEL
(37 POSTION MAX)
(SEE SHT 5)
4. COPLANARITY TO INCLUDE INSULATOR.
No OF POSITIONS
-02 THRU -50 (PER ROW)
5. MAXIMUM BURR ALLOWANCE: .002[0.05].
6. MAXIMUM CUT FLASH: .015[0.38]. (NO FLASH TO BE ON BOTTOM OF BODY).
7. -MT OPTION: PIN B TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY
-DH OPTION: PIN A TO BE FLUSH TO .003" ABOVE A LINE MADE BY THE BODY
PIN B TO BE FLUSH TO .001" BELOW/.003" ABOVE A LINE MADE BY THE BODY
-SH OPTION: PIN A TO BE FLUSH TO +/- .003" A LINE MADE BY THE BODY.
DO NOT
SCALE FROM
THIS PRINT
PAD OPTION
-P: PICK & PLACE PAD
(USE PPP-13)
LEAD STYLE
-01: .126 [3.20] POST
-02: .175 [4.45] POST
(SEE TABLE 2)
(2 POSITION MINIMUM)
-K: POLYIMIDE FILM PAD
(SEE FIG 14, SHT 6)
(3 POS MIN)
C
8. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS IN THE
POST AREA. (SEE TABLE 4)
9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED. THE -LC
OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
RECOMMENDS MANUAL PLACEMENTFOR ALL ASSEMBLIES WITH
THE -LC OPTION.
10. NOTE DELETED.
(USE K-DOT-.177-.281-.005)
OPTION
PLATING SPECIFICATION
-XXX: POLARIZED POSITION
-XXX SPECIFIES POSITION OMITTED
(SEE POLARIZATION VIEW)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE IN ON TAIL
OPTION (SEE NOTE 3)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LC: LOCKING CLIP (SEE NOTE 9)
(FOR -DH USE 2TS-XX-DH-LC-XX)
(FOR -SH USE 2TS-XX-SH)
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(NOT AVAILABLE WITH -A)
-A: ALIGNMENT PIN
-T: MATTE TIN CONTACT AND TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(FOR -DH USE 2TS-XX-DH-A-XX)
(FOR -SH USE 2TS-XX-SH-A-XX)
(NOT AVAILABLE WITH -LC)
-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
ROW OPTION
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-SH: SINGLE (2TS-XX-SH-X-XX)
+.005 [0.13]
- .010 [0.25]
-TM: MATTE TIN CONTACT AND TAIL
-DH: DOUBLE (2TS-XX-DH-XX-XX)
(NO. OF POS x .07874[2.0000])
-MT: MIXED TECHNOLOGY (2TS-XX-DH-XX-XX)
(NOT AVAILABLE WITH -LC, OR -A OPTIONS)
(NO OF POS - 1) x .07874[2.0000])
.003[0.08]
2
MAX SWAY
02
(EITHER DIRECTION)
.0787 2.000
.15748 4.0000
REF
.055 1.40
2TS-XX-DH-XX-XX
01
SEE NOTE 6
LC-06-TM
.0197 0.500 SQ
(TYP) REF
.11 2.8
"C"
(SEE TABLE 2)
.245±.010 6.22±0.254
SEE NOTE 5
0
3°
.003 0.08 MAX
(SEE NOTE 7)
C
C
SEE TABLE 5
(SEE NOTE 4)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
ANGLES
5
.XX: .01 [.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SMATEC.com code 55322
SEE NOTE 5
.XXX: .005 [.13]
(NO. OF POS x .07874[2.0000]
- .15748[4.0000]) .003[0.08]
.XXXX: .0020 [.051]
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP VECTRA;
UL 94 V0;
2mm HORIZONTAL TERMINAL SURFACE MOUNT STRIP ASSEM
DWG. NO.
COLOR: BLACK
TERMINAL: PHOS BRONZE
FIG 1
MMT-1XX-XX-XX-XX-XX-XXX-X-XX
MMT-108-01-X-DH-LC SHOWN
BY:
DEAN P
12/12/2000 SHEET 1 OF 6
F:\DWG\MISC\MKTG\MMT-1XX-XX-XX-XX-XX-XXX-X-XX-MKT.SLDDRW
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
