Applicable standard
Operating
Storage
-55 °C to +85 °C ( 90 %RH Max.)
-20 °C to +70 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω( 0 to 6 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 10 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 5 mΩ Max.
500 MΩ Min.
Insulation resistance
Withstanding voltage
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 6 GHz.
No flashover or breakdown.
VSWR 1.2 Max.
Voltage standing
wave ratio
1
X
-
-
-
Insertion loss
Frequency - to - GHz.
- dB Max.
MECHANICAL CHARACTERISTICS
0
0.37
by steel gauge.
Contact insertion and
extraction forces
Insertion and
φ
Insertion force
Extraction force 0.2 to 2 N.
Insertion force - N Max.
- N Max.
-
X
-
-
X
-
-0.003
Measured by applicable connector.
500 times insertion and extractions.
extraction forces
Mechanical operation
1
Extraction force - N Min.
1)Contact resistance:
-
-
Center contact 20 mΩ Max.
Outer contact 10 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
1
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
98 m/s2 at 12 cycles for 3 directions.(Total 36 cycles) 2)No damage, crack and looseness of parts.
735 m/s2 directions of pulse 6 ms
-
-
X
X
Shock
1
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min. and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
1
Exposed at +40 °C, 95 %
total 96 h.
1)Insulation resistance: 10 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
Rapid change of
temperature
1
Temperature -55 → 20 to 35 → +85 → 20 to 35°C No damage, crack and looseness of parts.
Time
30 →
3 →
30 →
3 min.
X
X
-
-
Under 5 cycles.
Corrosion salt mist
Exposed in 5 % salt water spray for 48 h.
VSWR 1.2 Max.
Count
0
Description of revisions
Designed
Checked
Date
TO.KATAYAMA
TO.KATAYAMA
NK.OOSAWA
NK.OOSAWA
20190604
20190604
20190604
20190604
Remark
Approved
Checked
Designed
Drawn
1
Note
The characteristic after mounting on the borad.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-356607-00-00
MMCX-R-SMT-4
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL339-0039-0-00
FORM HD0011-2-1