Freescale Semiconductor
Data Sheet: Technical Data
Document Number: MMA955xL
Rev. 3.1, 5/2015
An Energy Efficient Solution by Freescale
MMA955xL Intelligent
MMA9550L
MMA9551L
MMA9553L
MMA9559L
Motion-Sensing Platform
The MMA955xL device an intelligent sensor, incorporating dedicated
accelerometer MEMS transducers, signal conditioning, data conversion, and a
32-bit programmable microcontroller.
This unique blend transforms Freescale’s MMA955xL into an intelligent, high-
precision, motion-sensing platform able to manage multiple sensor inputs. This
device can make system-level decisions required for sophisticated applications
such as gesture recognition, pedometer functionality, tilt compensation and
calibration, and activity monitoring.
Top and bottom view
The MMA955xL device is programmed and configured with the CodeWarrior
Development Studio for Microcontrollers software, version 10.1 or later. This
standard integrated design environment enables customers to quickly
implement custom algorithms and features to exactly match their application
needs.
Using the master I2C port, the MMA955xL device can manage secondary
sensors, such as pressure sensors, magnetometers, or gyroscopes. This
allows sensor initialization, calibration, data compensation, and computation
functions to be off-loaded from the system application processor. The
MMA955xL device also acts as an intelligent sensing hub and a highly
configurable decision engine. Total system power consumption is significantly
reduced because the application processor stays powered down until
absolutely needed.
16-pin LGA
3 mm x 3 mm x 1 mm
Case 2094-01
Top view
Hardware Features
•
Three accelerometer operating ranges:
– ±2 g suits most hand gestures (orientation detection and tilt control) and
freefall. For tap detection, ±4 g and ±8 g are supported.
– ±4 g covers most regular human dynamics (walking and jogging)
– ±8 g detects most abrupt activities (gaming)
16 15 14
RGPIO7/AN1/
TPMCH1
RGPIO6/AN0
TPMCH0
13
V
DD
1
2
3
4
5
BKGD-MS
/RGPIO9
12
11
•
•
Integrated temperature sensor
RGPIO5/PDB_A/
INT_O
One slave SPI or I2C interface operating at up to 2 Mbps, dedicated to
communication with the host processor. Default value of the I2C, 7-bit
address is 0x4C. (This can be customized by firmware.)
One master I2C interface operating at up to 400 kbps that can be used to
communicate with external sensors
RESETB
SCL0/RGPIO0
SCLK
10
9
V
SS
V
SS
RGPIO4/INT
6
7
8
•
•
Eight selectable output data rates (ODR), from 488 Hz to 3.8 Hz (extending
farther from 3906 Hz to 0.24 Hz with MMA9559L Firmware version)
10, 12, 14, and 16-bit trimmed ADC data formats available
1.8 V supply voltage
•
•
•
•
•
32-bit CPU with MAC unit
Pin connections
Extensive set of power-management features and low-power modes
Integrated 16-bit resolution ADC can be used to convert external analog
signals
•
•
•
•
•
•
•
•
•
Single-Wire, Background-Debug Mode (BDM) pin interface
16-KB flash memory
2-KB Random Access Memory
ROM-based flash controller and slave-port, command-line interpreter
Two-channel timer with input capture, output capture, or edge-aligned PWM
Programmable delay block for scheduling events relative to start of frame
A 16-bit, modulo timer for scheduling periodic events
Minimal external component requirements
RoHS compliant (–40ºC to +85ºC), 16-pin, 3 x 3 x 1-mm LGA package
© 2011, 2013, 2015 Freescale Semiconductor, Inc. All rights reserved.