Document Number: MM908E622
Rev. 2.0, 6/2008
Freescale Semiconductor
Technical Data
Integrated Quad Half-bridge,
Triple High Side and EC Glass
Driver with Embedded MCU and
LIN for High End Mirror
908E622
QUAD HALF-BRIDGE, TRIPLE HIGH SIDE
SWITCH AND EC GLASS CIRCUITRY WITH
EMBEDDED MCU AND LIN
The 908E622 is an integrated single package solution that
includes a high-performance HC08 microcontroller with a
SMARTMOSTM analog control IC. The HC08 includes flash memory,
a timer, enhanced serial communications interface (ESCI), a 10 bit
analog-to-digital converter (ADC), serial peripheral interface (SPI)
(only internal), and an internal clock generator module (ICG). The
analog control die provides four half-bridge and three high side
outputs with diagnostic functions, an EC glass driver circuit, a Hall-
effect sensor input, analog inputs, voltage regulator, window
watchdog, and local interconnect network (LIN) physical layer.
The single package solution, together with LIN, provides optimal
application performance adjustments and space saving PCB design.
It is well suited for the control of automotive high-end mirrors.
DWB SUFFIX
98ASA10712D
54-PIN SOICW-EP
Features
• High performance M68HC908EY16 core
• 16K bytes of On-chip flash memory, 512 bytes of RAM
• Two 16-bit, 2-channel timers
ORDERING INFORMATION
Temperature
• LIN physical layer interface
Device
Package
Range (T )
• Autonomous MCU watchdog / MCU supervision
• One analog input with switchable current source
• Four low RDS(ON) Half-bridge outputs
• Three low RDS(ON) high side outputs
• EC glass driver circuitry
A
MM908E622ACDWB/R2 -40°C to 85°C 54 SOICW-EP
• Wake-up and 2/3-pin Hall-effect sensor input
• 12 microcontroller I/Os
908E622
LIN
VSUP[1:8]
L0
Wake Up Input
VDDA/VREFH
EVDD
VDD
HB1
HB2
4 x Half Bridge Outputs
M
M
M
VSSA/VREFL
EVSS
HB3
VSS
RST_A
RST
HB4
HS1
IRQ_A
IRQ
High Side Output 1
High Side Output 2
High Side Output 3
PTA0/KBD0
PTA1/KBD1
PTA2/KBD2
PTA3/KBD3
PTA4/KBD4
HS2
HS3
μC PortA
ECR
EC
PTB3/AD3
PTB4/AD4
PTB5/AD5
EC - Glas Control
Switched 5V output
μC PortB
μC PortC
PTC2/MCLK
PTC3/OSC2
PTC4/OSC1
HVDD
A0
A0CST
Analog Input with current source
Analog Input current source trim
Internally connected
Internally connected
PTD0/TACH0
PTD1/TACH1
μC PortD
μC PortE
H0
2-/3-pin hall sensor input
PTE1/RxD
TESTMODE
Pull to ground for user mode
GND[1:4] EP
Figure 1. 908E622 Simplified Application Diagram
Freescale Semiconductor, Inc. reserves the right to change the detail specifications,
as may be required, to permit improvements in the design of its products.
© Freescale Semiconductor, Inc., 2005-2008. All rights reserved.