NXP Semiconductors
Data Sheet: Technical Data
KV5XP144M240
Rev. 4, 06/2016
KV5x Data Sheet
MKV58F1M0Vxx24
240 MHz Cortex-M7 based MCU for Real-time, high
performance connected control
MKV56F1M0Vxx24
MKV58F512Vxx24
MKV56F512Vxx24
The Kinetis KV5x family of MCU is a high-performance solution
offering exceptional precision, sensing, and control targeting
Motor Control, Industrial Drives and Automation, and Power
Conversion. Apart from the high performance Cortex-M7 core, it
features top notch real time control peripherals such as high
resolution pulse-width modulation (PWM) with 260 ps resolution,
4 Fast 12-bit ADCs with 5 MSps, up to 44 PWM channels for
supporting multi-motor systems. It also comes with multiple
communication peripherals including 3 FlexCAN modules,
optional Ethernet Communications, and multiple UART, SPI, and
I2C modules. The KV5x is supported by a comprehensive
enablement suite from NXP and third-party resources including
reference designs, software libraries, and motor configuration
tools.
144 LQFP
20 x 20 x 1.4 mm Pitch 13 x 13 x 1.23 mm
0.5 mm Pitch 1.0 mm
144 BGA
100 LQFP
14 x 14 x 1.4 mm Pitch 0.5 mm
Core
• ARM® Cortex®-M7 core up to 240 MHz with single
precision Floating Point Unit (FPU)
Communication interfaces
• Six UART/FlexSCI modules with programmable 8-
or 9-bit data format
• Three 16-bit SPI modules
• Two I2C modules
• Three FlexCAN modules
• Ethernet Module (Optional)
Memories
• Up to 1 MB program flash memory
• Up to 256 KB RAM
• External memory interface (FlexBus)
Analog Modules
System peripherals
• Four 12-bit SAR High Speed ADCs with 5 MSPS
sample rate
• One 16-bit ADC
• Four CMPs with a 6-bit DAC and programmable
reference input
• One 12-bit DAC
• 32-channel DMA controller
• Low-leakage wakeup unit
• SWD debug interface
• Advanced independent clocked watchdog
• JTAG debug interface
Clocks
Timers
• 32 to 40 kHz or 3 to 32 MHz crystal oscillator
• MCG with FLL and PLL referencing internal or external
reference clock
• Two eFlexPWM with 4 sub-modules, with 12 PWM
outputs, one eFlexPWM module with less than 285
ps resolution provided by nano-edge module.
• Two 8-channel FlexTimers (FTM0 and FTM3)
• Two 2-channel FlexTimers (FTM1 and FTM2)
• Four Periodic interrupt timers (PIT)
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Temperature range: –40 to 105 °C
• Two Programmable Delay Blocks (PDB)
• Quadrature Encoder/Decoder (ENC)
Human-machine interface
• General-purpose input/output
Security and integrity modules
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.