Document Number: KL25P80M48SF0
Rev. 3, 9/19/2012
Freescale Semiconductor
Data Sheet: Technical Data
KL25P80M48SF0
KL25 Sub-Family Data Sheet
Supports the following:
MKL25Z32VFM4, MKL25Z64VFM4,
MKL25Z128VFM4, MKL25Z32VFT4,
MKL25Z64VFT4, MKL25Z128VFT4,
MKL25Z32VLH4, MKL25Z64VLH4,
MKL25Z128VLH4, MKL25Z32VLK4,
MKL25Z64VLK4, and MKL25Z128VLK4
Features
Security and integrity modules
– 80-bit unique identification (ID) number per chip
•
•
Operating Characteristics
– Voltage range: 1.71 to 3.6 V
•
Human-machine interface
– Low-power hardware touch sensor interface (TSI)
– General-purpose input/output
– Flash write voltage range: 1.71 to 3.6 V
– Temperature range (ambient): -40 to 105°C
Performance
– Up to 48 MHz ARM® Cortex-M0+ core
•
•
Analog modules
– 16-bit SAR ADC
– 12-bit DAC
– Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
•
•
Memories and memory interfaces
– Up to 128 KB program flash memory
– Up to 16 KB RAM
Clocks
Timers
•
•
– 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal
oscillator
– Multi-purpose clock source
– Six channel Timer/PWM (TPM)
– Two 2-channel Timer/PWM (TPM)
– Periodic interrupt timers
– 16-bit low-power timer (LPTMR)
– Real-time clock
System peripherals
– Nine low-power modes to provide power
optimization based on application requirements
– 4-channel DMA controller, supporting up to 63
request sources
Communication interfaces
•
– USB full-/low-speed On-the-Go controller with on-
chip transceiver and 5 V to 3.3 V regulator
– Two 8-bit SPI modules
– COP Software watchdog
– Low-leakage wakeup unit
– Two I2C modules
– SWD interface and Micro Trace buffer
– Bit Manipulation Engine (BME)
– One low power UART module
– Two UART modules
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2012 Freescale Semiconductor, Inc.