NXP Semiconductors
Data Sheet: Technical Data
K24P142M120SF5
Rev. 7, 10/2016
Kinetis K24 Sub-Family Data
MK24FN1M0CAJ12R
Sheet With 1 MB Flash
120 MHz ARM® Cortex®-M4-based Microcontroller with FPU
The K24 product family members are optimized for cost-sensitive
applications requiring low-power, USB connectivity, processing
efficiency with floating point unit, optimized integration and high
embedded memory densities. These devices share the
comprehensive enablement and scalability of the Kinetis family.
This product offers:
• Up to 1 MB flash, with 256 KB of embedded SRAM
• Run power consumption down to 250 μA/MHz. Static
power consumption down to 5.8 μA with full state retention
and 5 μs wakeup. Lowest Static mode down to 339 nA
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO
voltage regulator with USB device crystal-less operation
142 WLCSP
4.84 x 5.58 x 0.60 mm Pitch 0.4 mm
Performance
• Up to 120 MHz ARM® Cortex®-M4 core with DSP
Communication interfaces
• USB full-/low-speed On-the-Go controller
• Controller Area Network (CAN) module
• Three SPI modules
instructions and Floating Point Unit delivering 1.25
Dhrystone MIPS per MHz
• Three I2C modules
• Six UART modules
Memories and memory interfaces
• Up to 1 MB program flash memory and 256 KB RAM
• FlexBus external bus interface
• Secure Digital Host Controller (SDHC)
• I2S module
System peripherals
Timers
• Multiple low-power modes, low-leakage wakeup unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
• Programmable delay block
• Two 8-channel FlexTimers (PWM/Motor Control)
• Two 2-channel FlexTimer (Quad Decoder/PWM)
• PIT and 16-bit low-power timer
• Carrier modulator transmitter
• External watchdog monitor and software watchdog
Clocks
• Real-time clock
• 3 to 32 MHz and 32 kHz crystal oscillator
• Multi-purpose clock generator
• 1 kHz, 32 kHz, and 4 MHz internal reference clock
• 48 MHz internal reference
Analog modules
• Two 16-bit SAR ADCs
• Two 12-bit DACs
• Three analog comparators (CMP)
• Voltage reference
Security and integrity modules
• Hardware CRC module
• Hardware random-number generator
• Hardware encryption supporting DES, 3DES, AES,
MD5, SHA-1, and SHA-256 algorithms
• 128-bit unique identification (ID) number per chip
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 85°C
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.