0.05-4.0 GHz
Dual High Dynamic Range Amplifier
April 2006 - Rev 11-Apr-06
CDQ6004-QS
Features
Matched Pair of Amplifiers for Optimum Balanced Design
0.25 to 3GHz Frequency Range
44 dBm Output IP3 (Balanced configuration)
41 dBm Output IP3 (Single-ended configuration)
15 dB Gain
23 dBm P1dBm
2.1dB Noise Figure
RoHS Compliant 4X4 QFN Package
Singale Positive Supply
+3V to +5V Voltage Rail
Absolute Maximum Ratings
General Description
Supply Voltage
+6.0 V
The CDQ6004-QS is a dual high dynamic range amplifier designed
for applications operation within the 0.25 to 3GHz frequency range.
Co-located matched amplifiers are assembled in the 4mm X 4mm
QFN package.The low-cost, surface-mount, 16 terminal, plastic
package is RoHS compliant.The CDQ6004-QS is an ideal solution for
implementing balanced or push-pull designs.The amplifier can also
be used for dual-band operation where single-ended design is used
for each band.The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of low NF
and high IP3 at the same bias point make it an ideal transmit or
receive solution when used in applications including CATV
operating from 50 to 850 MHz, cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from 2.2
to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All
devices are 100% RF and DC tested.
RF Input Power
+20 dBm
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Operation of this device above any of these parameters may cause damage.
Typical Parameters
Parameter
Frequency Range
Gain
Typical
Units
GHz
0.9
16.5
-13
-16
42
2
2.4
14.9
-20
15
-11
-12
41
dB
dB
Input Return Loss
Output Return Loss
Output IP3
-11
dB
40.5
2.6
dBm
dB
2.1
2.1
+23
Noise Figure
+23
+24
dBm
Output P1dB
Typical values reflect performance in recommended application circuit @ +5V.
Electrical Characteristics (T = 25ºC)
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Condition
Units
GHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min.
0.25
13.5
Typ.
Max.
3.0
Externally Matched
Externally Matched
Externally Matched
15
-10
-10
41
2.1
23
38
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
120
150
5.0
180
Notes:
1.T = 25ºC, Frequency = 2 GHz, 50 Ohm system.
2. Each single ended amplifier is tested separately.
3. OIP3 is measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
4. Slight performance degredation is expected over temperature.
Page 1 of 10
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5秒后页面跳转
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
2SC1815三极管参数及引脚图功能详解
TL432和TL431有什么区别
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
