MIC2210
Micrel
MIC2210
Dual µCap LDO with Open-Drain Driver
REV. 11/04
General Description
Features
The MIC2210 is a dual µCap low dropout regulator with an
open-draindriverandpower-onresetcircuit.Thefirstregulator
iscapableofsourcing150mA,whilethesecondregulatorcan
source up to 300mAand includes a power-on reset function.
The open-drain output is capable of sinking 150mA for LED
backlighting applications.
• Input voltage range: 2.25V to 5.5V
• Stable with ceramic output capacitor
• 2 LDO outputs
• Output 1 - 150mA output current
• Output 2 - 300mA output current
• 1 Open-drain driver
• Low dropout voltage of 80mV @ 100mA
• Ultra-low quiescent current of 48µA
• High output accuracy:
• +1.0% initial accuracy
• +2.0% over temperature
• Thermal shutdown protection
• Current limit protection
• Tiny 10-pin 3mm × 3mm MLF™ package
Idealforbatteryoperatedapplications,theMIC2210offers1%
accuracy, extremely low dropout voltage (80mV @ 100mA),
and extremely low ground current, only 48µAtotal. Equipped
with a TTL logic compatible enable pin*, the MIC2210 can
be put into a zero-off-mode current state, drawing no current
when disabled.
The MIC2210 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost.
Applications
The MIC2210 is available in fixed output voltages in the
10-pin 3mm × 3mm MLF™ leadless package and is also
available with adjustable output voltages in the 4mm × 4mm
16-pin MLF™ package.
• Cellular/PCS phones
• Wireless modems
• PDAs
* For each output.
Typical Application
LED x10
Keyboard
Backlight
MIC2210-xxBML
Audio Amp
Baseband IC
VIN
VOUT1
VOUT2
ERR
EN1
EN2
CBYP
SW
1
F
1 F
DRV
CBYP
GND
MIC2210 Typical Cellphone Application
MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc.
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
November 2004
1
MIC2210