MIC2012
Micrel
MIC2012/MIC2072
USB Power Controller
General Description
Features
TheMIC2012isadualchannelUSBpowerswitchdesignedto
supportthepowerdistributionrequirementsforUSBWakeup
from the ACPI S3 state. The MIC2012 will directly switch its
two outputs between a 5V main supply and a 5V auxiliary
supply normally provided in ATX style power supplies.
• Compliant to USB power distribution specifications
• UL Recognized Component
• Two completely independent switches
• Integrated switching matrix supports ACPI S0/S3 state
transitions without external FET circuits
• Make-before-break switching ensures glitch-free
transitions
The MIC2012 will adjust its current-limit threshold according
to theACPI state it is in. In the normal active S0 state the cur-
rent-limit is set at 500mAminimum per channel satisfying the
USB continuous output current specification. In the S3 state
the current-limit can be reduced to only 100mA per channel
to minimize the current that is supplied by the auxiliary supply
thereby ensuring that voltage regulation is maintained even
during fault conditions.
TheMIC2012providesmake-before-breakswitchingtoensure
glitch-free transitions between the S3 and S0 states. Each
channel is also thermally isolated from the other so that a
fault in one channel does not effect the other. FAULT status
output signals are also provided indicating overcurrent and
thermal shutdown conditions.
• No back-feed of auxiliary supply onto main supply dur-
ing standby mode
• Bi-level current-limit preserves auxiliary supply voltage
regulation in standby mode
• Thermally isolated channels
• Thermal shutdown protection
• Fault status outputs with filter prevents false assertions
during hot-plug events
• Latched thermal shutdown options with auto-reset
(MIC2072)
• Undervoltage lockout
Applications
The MIC2072 option latches the output off upon detecting
an overcurrent condition for more than 5ms minimum. The
output can be reset by either toggling the EN inputs of the
MIC2072-1, -2 or by removing the load. Latching the output
offprovidesacircuitbreakermodeofoperationwhichreduces
power consumption during fault conditions.
• Desktop PCs
• Notebook PCs
• Notebook Docking stations
• LAN Servers
• PC Motherboards
Typical Application
ATX Power Supply
5V MAIN
VBUS
5V STANDBY
Downstream
D+
D–
MIC2012P
USB
Port 1
OUT1
OUT2
MAIN
AUX
GND
100F
S3 Control
S3#
VBUS
D+
D–
FAULT1#
FAULT2#
GND
Downstream
USB
Port 2
100F
GND
82801AA or Equivalent
SLP S3#
SLP S5#
Overcurrent Port 1
Overcurrent Port 1
OC0
OC1
Figure 1. USB Wakeup with Control Input
UL Recognized Component
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
January 2005
1
MIC2012/2072