RF-12 (Rev 31-JUL-13)
MH081–MH3RP–MH3RP–0300
MH081–MH3RP–01BJ1–0300
MH081* SERIES
MICRO HIGH FREQUENCY RF CABLES
U.FL and W.FL Types
SPECIFICATIONS
For complete specifications see
Micro High Frequency RF,
MHF or SMA Bulkhead
www.samtec.com?MH081
Outer Contact Material:
Au plated Phosphor Bronze
Center Contact Material:
Au plated Phosphor Bronze (MHX)
Au plated BeCu (SMA)
Insulator Material:
PBT (MHX)
(0,81 mm) .032"
Diameter Cable
THINK OUTSIDE THE CATALOG
•
Create a full system:
cable assembly
and board
PTFE (SMA)
Operating Temperature:
-40°C to +90°C
level mates,
50Ω and
OTHER SOLUTIONS
Voltage Rating:
170V max
75Ω
Dielectric Withstanding
Voltage: 200 Vrms
Frequency Range:
0~3 GHz
• Micro RF PCB
connectors for
Micro High
Frequency RFs
• MH1RP end mates
with RSP-122811-01
solutions
•
24-hour
Mating PCB
connectors
available
samples
on standard
products
Contact Resistance:
Center Contact: 6mΩ max
Outer Contact: 2mΩ max
Insulator Resistance:
5,000 MΩ
• Visit: rf.samtec.com
• MH3RP end mates
with RSP-122811-02
Impedance: 50Ω
RoHS Compliant: Yes
0,81 mm Cable:
Impedance: 50Ω
END 1
CONNECTOR
END 2
CONNECTOR
Capacitance: 100 pF/meter
Max Attenuation
OVERALL
LENGTH
MH081
(cable only):
3.1dB @ 1GHz
Conductor Size:
36 AWG, (0,81 mm) .032" dia.
Conductor Material:
Silver Plated Copper
Conductor Resistance:
1.40Ω/meter max
Specify
–0030
= 1.18" (30 mm)
END OPTIONS
from chart
Insulator Diameter:
(0,4 mm) .016"
–0050
= 1.97" (50 mm)
XXXX = OAL (millimeters)
Insulator Material: FEP
Shield Material:
(2,69) .106 DIA
Silver Plated Copper
Jacket Material: FEP
Jacket Diameter:
(1,64) .064 DIA
(4,70) .185
–0100
(2,50) .098 max.
(Mated Height)
(1,20)
.047
= 3.94" (100 mm)
(0,81 mm) .032" dia.
Jacket Temp Rating:
-40°C to +90°C
–0150
= 5.91" (150 mm)
END OPTIONS
RoHS Compliant: Yes
–0300
–MH1RP = MHF1 Type Plug
(30µ" (0,76 µm) Gold on Center Contact,
Gold Flash on Shell)
= 11.81" (300 mm)
ALSO AVAILABLE
(MOQ Required)
–MH3RP = MHF3 Type Plug
(30µ" (0,76 µm) Gold on Center Contact,
Gold Flash on Shell)
• Stripped & Tinned:
Other sizes or tinning
options
• Additional end connector
combinations
• Overall lengths
Contact Samtec.
–01BJ1 = SMA, Straight Bulkhead Jack
STRIPPED & TINNED
(Dimensions in mm)
–01BJ2 = SMA, Straight Bulkhead Jack,
Reversed Polarity
–01SB1 = SMA, Straight Jack, Sealed Bulkhead
CALLOUT A
B
C
–01SR1 = SMA, Straight Jack, Sealed Bulkhead,
–303030 3.0 3.0 3.0
–303040 3.0 3.0 4.0
–403030 4.0 3.0 3.0
–403040 4.0 3.0 4.0
–404040 4.0 4.0 4.0
Reversed Polarity
(30µ" (0,76 µm) Gold on Center Contact,
Gold Flash on Shell)
EXTRACTION TOOL
–SING =
Single Ended
(End 2 callout)
–MH1RP = RSP-122893-01
–MH3RP = RSP-122893-02
Both center conductor and
braid shield are stripped,
only the center
B
XXXXXX =
Stripped & Tinned
(End 2 callout)
A
C
conductor is tinned.
* MH081 Series was
previously RF081 Series
WWW.SAMTEC.COM