MODEL: MDP-LC
Lightning Surge Protectors for
Electronics Equipment M-RESTER
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
LIGHTNING SURGE PROTECTOR FOR
STRAIN GAUGE USE
Functions & Features
INSTALLATION
• Designed to protect strain gauge transmitters from
lightning surge damage that enters on the wiring between
the strain gauge and the transmitter
• Absorbs surges only without affecting instrumentation
signal
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 100 g (0.22 lb), standard; 125 g (0.28 lb), with DIN
rail mounting adapter
• No interruption of signal by unplugging the protector
element
PERFORMANCE
Max. continuous operating voltage (Uc):
23.5 (.93)
Output side: ±0.3 V
Excitation side: 15 V
Line to earth: ±15 V
Lot.NO
N1430B
100
(3.94)
Voltage protection level (Up):
• @ Imax
JPAN
MADEIN
M•STER
MODEL
Output side: ±15 V
Excitation side: 30 V
80 (3.15)
mm (inch)
Line to earth: ±30 V
Response time: ≤ 5 nsec.
Leakage current:
Output side: ≤ 0.2 μA @ ±0.3 V DC
Excitation side: ≤ 2 μA @ 15 V DC
Line to earth: ≤ 2 μA @ ±15 V DC
Max. discharge current (Imax)
Output side: 100 A (8/20 μs), 25 A (10/1000 μs)
Excitation side: 50 A (8/20 μs), 25 A (10/1000 μs)
Line to earth: 50 A (8/20 μs), 25 A (10/1000 μs)
Capacitance @ 1 MHz:
MODEL: MDP–LC[1]
ORDERING INFORMATION
• Code number: MDP-LC[1]
Specify a code from below for [1].
(e.g. MDP-LC/A33/Q)
• Specify the specification for option code /Q
(e.g. /C01)
Output side: ≤ 100 pF
Excitation side: ≤ 4 nF
Line to earth: ≤ 2 nF
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
Surge protection: IEC 61643-21 Categories C3
/A33: With adapter (model A-33)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MDP-LC SPECIFICATIONS
ES-8128 Rev.10 Page 1/4
http://www.m-system.co.jp/