CMOSꢀOscillator -55+125°C Low Jitter
MCSO2F
Specifications
2011/65/EU
MCSO2F:ꢀ 10.0kHz ~ 20.0MHz
MCSO2FH: ꢀ20.0 ~ 225MHz
Product
MCSO2F
Option
Codes
Parameters
Frequency range:10.0kHz ~ 225MHz
Supply voltage (VDD): +3.3V (±5%)
V
+2.5V (±5%)
W
Frequency stability*:
±100ppm
±50ppm
T
5.00
±0.01
tighter stabilities on request
specify
Operating temperature range:
0 to +70°C
3.20
±0.01
A
B
C
-40 to +85°C
-55 to +125°C
1.70
(max)
Storage temperature range:
-55 to +125°C
SOLDER PAD LAYOUT
Supply current:
See table
4
3
1.00
1.60
1
4
2
3
Driving ability:
Load:
CMOS
1.60
3pF min, 47pF max
1
2
1.00
Logic levels: ‘0’ level = +0.4V max
2.35
1.50 2.70 1.50
TOP VIEW
‘1’ level = VDD-0.5V min
Start up time:
5ms max
Waveform symmetry:
40:60 max @ 50%VDD
Features
Jitter RMS (1): < 2ps (≤20.0MHz)
< 10ps (>20.0MHz)
Low jitter
Rise / fall times: 7ns max ≤20MHz
3ns max >20MHz
150ns max@ 32.768kHz
Military temperature range -55+125°C option
Excellent shock & vibration resistance
Enable / disable tristate option (>500kHz)
Wide frequency range available
Enable / disable function:
None (pad 1 NC)
Tristate* (control via pad 1)
*ꢀnot available under 500kHz
E
Shock resistance:
5,000G, 0.3ms, ½ sine
Vibration resistance:
20G rms 10.0 ~ 2,000Hz
Enable / Disable Function
Input (pad 1)
Output (pad 3)
Soldering condition:
260°C, 10 sec max
Open
‘1’ level
‘0’ level
Enabled
Enabled
High Impedance
Standard. Optional - Please specify required code(s) when ordering
*ꢀFrequency stability is inclusive of calibration @ꢀ25°C, operating temperature range, sup-
ply voltage change, load change and ageing over 10 years.
Supply current
Freq / Supply
2.5V
3.3V
Ordering Information
32kHz
<10MHz
10 ~ 20MHz
>20 ~ 160MHz
300μA
2mA
3mA
25mA
1mA
4mA
5mA
30mA
Product name + option codes + frequency
eg: MCSO2FV/CE 10.0MHz 3.3V ±100ppm -55 to +125°C Enable / disable
For frequencies 20.0MHz add an 'H' to the product name
eg: MCSO2FHW/TB 32.0MHz 2.5V ±50ppm -40 to +85°C no E/D
Option code X (eg MCSO2F/X) denotes a custom specification.
Maximum values, no load.
Packed in trays (128pcs/tray) or T&R 250 ~ 1,000pcs/reel
A 47nF ceramic capacitor must be connected between GND and VDD
Tel: +44 1460 256 100
Fax: +44 1460 256 101
E-mail: sales@golledge.com
Web: www.golledge.com
17 Dec 2015