Datasheet > MCP2510T-I/P

MCP2510T-I/P

更新时间： 2024-09-23 20:36:47

品牌	Logo	应用领域
美国微芯 - MICROCHIP		时钟局域网数据传输光电二极管外围集成电路
页数	文件大小	规格书
12页	220K
描述
2 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDIP18, 0.300 INCH, PLASTIC, DIP-18

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MCP2510T-I/P 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	DIP
包装说明：	DIP,	针数：	18
Reach Compliance Code：	compliant	HTS代码：	8542.31.00.01
风险等级：	5.63	边界扫描：	NO
最大时钟频率：	25 MHz	数据编码/解码方法：	NRZ
最大数据传输速率：	0.125 MBps	JESD-30 代码：	R-PDIP-T18
JESD-609代码：	e3	长度：	22.8 mm
低功率模式：	YES	串行 I/O 数：	2
端子数量：	18	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	DIP	封装形状：	RECTANGULAR
封装形式：	IN-LINE	峰值回流温度（摄氏度）：	NOT SPECIFIED
认证状态：	Not Qualified	座面最大高度：	4.32 mm
最大供电电压：	5.5 V	最小供电电压：	3 V
标称供电电压：	4.5 V	表面贴装：	NO
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn)	端子形式：	THROUGH-HOLE
端子节距：	2.54 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	7.62 mm
uPs/uCs/外围集成电路类型：	SERIAL IO/COMMUNICATION CONTROLLER, LAN	Base Number Matches：	1

MCP2510T-I/P 数据手册

00733a.book Page 1 Tuesday, September 26, 2000 1:43 PM

AN733

Using the MCP2510 CAN Developer’s Kit

Figure 1 is a block diagram of the MCP2510 board. The

board is a two node CAN system that can be used

together to implement a simple bus or can be con-

nected to an external bus using the off-board connec-

tor. For the purposes of this application note, the left

node will be referred to as the PC node and the right

Author:

Pat Richards

Microchip Technology Inc.

INTRODUCTION

node will be referred to as the PICmicro node.

The MCP2510 eases software development and short-

ens the learning curve for the MCP2510 by providing

three PC software templates with different functions

that CAN node designers can use as needed. By using

one of the templates, the user can read, display, and

modify all of the registers in the MCP2510 down to the

bit level. Another template can demonstrate basic

input/output functionality by allowing messages to be

transmitted and received on the CAN bus. Finally, the

Both nodes are identical except for the controller inter-

face to the MCP2510 is a PC for one node and a PIC

microcontroller for the other node. By providing a two

node CAN network on a single board, a simple CAN

network can be implemented with one PCB.

PC Node

The left node (as oriented in Figure 1) is referred to as

the PC node. The PC performs the microcontroller

functions and interfaces to the MCP2510 via Serial

Peripheral Interface (SPI™) through the parallel port.

third template is a demonstration template that, by

using

a preprogrammed PICmicro microcontroller

(MCU), implements a two node CAN bus that gets the

user “on the bus” in the shortest amount of time and

effort.

The software templates control this node.

PICmicro Node

This application note serves as a three-part tutorial for

the MCP2510 and discusses the three software tem-

plates in detail as well as the important menu items.

The right node is referred to as the PICmicro node and

represents a typical CAN node. This node is used by

the end user as needed. When running the “MCP2510

Evaluation” template, demonstration firmware is used

to complete a CAN system.

FIGURE 1:

BLOCK DIAGRAM OF MCP2510 DEVELOPMENT BOARD

PC Node

To PC

PICmicro Node

SPI

CANH

CANL

External

CAN Bus

2000 Microchip Technology Inc.

Preliminary

DS00733A-page 1

12 3 4 5 6 7...12

中文翻译

下载PDF

与MCP2510T-I/P相关器件

型号	品牌	获取价格	描述	数据表
MCP2510T-I/SO	MICROCHIP	获取价格	1 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDSO18, 0.300 INCH, PLASTIC, SOIC-18
MCP2510T-I/SOA01	MICROCHIP	获取价格	1 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDSO18, 0.300 INCH, PLASTIC, SOIC-18
MCP2510T-I/SOA04	MICROCHIP	获取价格	1 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDSO18, 0.300 INCH, PLASTIC, SOIC-18
MCP2510T-I/ST	MICROCHIP	获取价格	1 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDSO20, 4.40 MM, PLASTIC, TSSOP-20
MCP2510T-I/STVAO	MICROCHIP	获取价格	1 CHANNEL(S), 1M bps, LOCAL AREA NETWORK CONTROLLER, PDSO20, 4.40 MM, PLASTIC, TSSOP-20
MCP2510T-ISO	MICROCHIP	获取价格	暂无描述
MCP2510T-IST	MICROCHIP	获取价格	Stand-Alone CAN Controller with SPIInterface
MCP2515	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI⑩ Interfac
MCP2515_12	MICROCHIP	获取价格	Stand-Alone CAN Controller with SPI Interface
MCP2515DM	MICROCHIP	获取价格	16-bit Embedded Control Solutions

与MCP2510T-I/P相关文章

SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

4
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

6
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

78
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

68

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2510T-I/P

MCP2510T-I/P 技术参数

MCP2510T-I/P 数据手册

与MCP2510T-I/P相关器件

与MCP2510T-I/P相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2510T-I/P

MCP2510T-I/P 技术参数

MCP2510T-I/P 数据手册

与MCP2510T-I/P相关器件

与MCP2510T-I/P相关文章

您还可以找

您在本页遇到什么问题？