Datasheet > 消费电路 > 其他商用集成电路> MCP2030T-I/SL

MCP2030T-I/SL

更新时间： 2024-11-27 04:16:23

品牌	Logo	应用领域
美国微芯 - MICROCHIP		/
页数	文件大小	规格书
66页	1060K
描述
Three-Channel Analog Front-End Device

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

MCP2030T-I/SL 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	SOP,	Reach Compliance Code：	compliant
HTS代码：	8542.39.00.01	风险等级：	5.06
商用集成电路类型：	CONSUMER CIRCUIT	JESD-30 代码：	R-PDSO-G14
JESD-609代码：	e3	长度：	8.69 mm
湿度敏感等级：	1	功能数量：	1
端子数量：	14	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	260
座面最大高度：	1.75 mm	最大供电电压 (Vsup)：	3.6 V
最小供电电压 (Vsup)：	2 V	表面贴装：	YES
温度等级：	INDUSTRIAL	端子面层：	Matte Tin (Sn) - annealed
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
宽度：	3.9 mm	Base Number Matches：	1

MCP2030T-I/SL 数据手册

MCP2030

Three-Channel Analog Front-End Device

Device Features:

Description:

• Three input pins for analog input signals

• High input detection sensitivity (3 mV_PP, typical)

• High modulation depth sensitivity (as low as 8%)

• Three output selections:

The MCP2030 is a stand-alone Analog Front-End

(AFE) device for Low-Frequency (LF) sensing and bidi-

rectional communication applications. The device has

eight internal Configuration registers which are

readable and programmable, except the read-only

STATUS register, by an external device.

- Demodulated data

- Carrier clock

The device has three low-frequency input channels.

Each input channel can be individually enabled or dis-

abled. The device can detect an input signal with ampli-

tude as low as ~1 mV_PPand can demodulate an

amplitude-modulated input signal with as low as 8%

modulation depth. The device can also transmit data by

clamping and unclamping the input LC antenna

voltage.

- RSSI

• Input carrier frequency: 125 kHz, typical

• Input data rate: 10 Kbps, maximum

• 8 internal Configuration registers

• Bidirectional transponder communication

(LF talk back)

• Programmable antenna tuning capacitance

(up to 63 pF, 1 pF/step)

The device can output demodulated data, carrier clock

or RSSI current depending on the register setting. The

demodulated data and carrier clock outputs are avail-

able on the LFDATA pin, while the RSSI output is avail-

able on the RSSI pin. The RSSI current output is

linearly proportional to the input signal strength.

• Programmable output enable filter

• Low standby current: 4 μA (with 3 channels

enabled), typical

• Low operating current: 13 μA (with 3 channels

enabled), typical

The device has programmable internal tuning capaci-

tors for each input channel. The user can program

these capacitors up to 63 pF, 1 pF per step. These

internal tuning capacitors can be used effectively for

fine-tuning of the external LC resonant circuit.

• Serial Peripheral Interface (SPI™) with external

devices

• Supports Battery Back-Up mode and batteryless

operation with external circuits

• Industrial and Extended Temperature Range:

-40°C to +85°C (industrial)

The device is optimized for very low current consump-

tion and has various battery-saving low-power modes

(Sleep, Standby, Active). The device can also be oper-

ated in Battery Back-up and Batteryless modes using a

few external components.

Typical Applications:

• Automotive industry applications:

- Passive Keyless Entry (PKE) transponder

- Remote door locks and gate openers

- Engine immobilizer

This device is available in 14-pin PDIP, SOIC, and

TSSOP packages. This device is also used as the AFE

in the PIC16F639.

- LF initiator sensor for tire pressure monitoring

systems

Package Types:

MCP2030

• Security Industry applications:

- Long range access control transponder

- Parking lot entry transponder

PDIP, SOIC, TSSOP

V_SS

- Hands-free apartment door access

- Asset control and management

LCCOM

SCLK/ALERT

RSSI

12 NC

LCX

LCY

LCZ

V_DD

LFDATA/

CCLK/SDIO

V_DD

DS21981A-page 1

12 3 4 5 6 7...66

中文翻译

下载PDF

MCP2030T-I/SL 替代型号

型号	品牌	替代类型	描述	数据表
MCP2030-I/SL	MICROCHIP	类似代替	Three-Channel Analog Front-End Device

与MCP2030T-I/SL相关器件

型号	品牌	获取价格	描述	数据表
MCP2030T-I/ST	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2035-I/ST	MICROCHIP	获取价格	SPECIALTY ANALOG CIRCUIT
MCP2035T-I/ST	MICROCHIP	获取价格	SPECIALTY ANALOG CIRCUIT
MCP2036	MICROCHIP	获取价格
MCP2036-E/MG	MICROCHIP	获取价格	Inductive Sensor Analog Front End Device
MCP2036-E/ML	MICROCHIP	获取价格	SPECIALTY CONSUMER CIRCUIT, PQCC16, 4 X 4 MM, 0.90 MM HEIGHT, PLASTIC, QFN-16
MCP2036-E/P	MICROCHIP	获取价格	Inductive Sensor Analog Front End Device
MCP2036-E/SL	MICROCHIP	获取价格	Inductive Sensor Analog Front End Device
MCP2036-I/MG	MICROCHIP	获取价格	Inductive Sensor Analog Front End Device
MCP2036-I/ML	MICROCHIP	获取价格	SPECIALTY CONSUMER CIRCUIT, PQCC16, 4 X 4 MM, 0.90 MM HEIGHT, PLASTIC, QFN-16

与MCP2030T-I/SL相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

46
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

35
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

64
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

61

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2030T-I/SL

MCP2030T-I/SL 技术参数

MCP2030T-I/SL 数据手册

MCP2030T-I/SL 替代型号

与MCP2030T-I/SL相关器件

与MCP2030T-I/SL相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2030T-I/SL

MCP2030T-I/SL 技术参数

MCP2030T-I/SL 数据手册

MCP2030T-I/SL 替代型号

与MCP2030T-I/SL相关器件

与MCP2030T-I/SL相关文章

您还可以找

您在本页遇到什么问题？