Datasheet > 消费电路 > 其他商用集成电路> MCP2030-I/P

MCP2030-I/P

更新时间： 2024-11-27 04:16:23

品牌	Logo	应用领域
美国微芯 - MICROCHIP		/
页数	文件大小	规格书
66页	1060K
描述
Three-Channel Analog Front-End Device

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MCP2030-I/P 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	DIP
包装说明：	DIP,	针数：	14
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	17 weeks
风险等级：	5.55	商用集成电路类型：	CONSUMER CIRCUIT
JESD-30 代码：	R-PDIP-T14	JESD-609代码：	e3
长度：	19.05 mm	功能数量：	1
端子数量：	14	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	DIP	封装形状：	RECTANGULAR
封装形式：	IN-LINE	峰值回流温度（摄氏度）：	NOT APPLICABLE
认证状态：	Not Qualified	座面最大高度：	4.32 mm
最大供电电压 (Vsup)：	3.6 V	最小供电电压 (Vsup)：	2 V
表面贴装：	NO	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn)	端子形式：	THROUGH-HOLE
端子节距：	2.54 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT APPLICABLE	宽度：	7.62 mm
Base Number Matches：	1

MCP2030-I/P 数据手册

MCP2030

Three-Channel Analog Front-End Device

Device Features:

Description:

• Three input pins for analog input signals

• High input detection sensitivity (3 mV_PP, typical)

• High modulation depth sensitivity (as low as 8%)

• Three output selections:

The MCP2030 is a stand-alone Analog Front-End

(AFE) device for Low-Frequency (LF) sensing and bidi-

rectional communication applications. The device has

eight internal Configuration registers which are

readable and programmable, except the read-only

STATUS register, by an external device.

- Demodulated data

- Carrier clock

The device has three low-frequency input channels.

Each input channel can be individually enabled or dis-

abled. The device can detect an input signal with ampli-

tude as low as ~1 mV_PPand can demodulate an

amplitude-modulated input signal with as low as 8%

modulation depth. The device can also transmit data by

clamping and unclamping the input LC antenna

voltage.

- RSSI

• Input carrier frequency: 125 kHz, typical

• Input data rate: 10 Kbps, maximum

• 8 internal Configuration registers

• Bidirectional transponder communication

(LF talk back)

• Programmable antenna tuning capacitance

(up to 63 pF, 1 pF/step)

The device can output demodulated data, carrier clock

or RSSI current depending on the register setting. The

demodulated data and carrier clock outputs are avail-

able on the LFDATA pin, while the RSSI output is avail-

able on the RSSI pin. The RSSI current output is

linearly proportional to the input signal strength.

• Programmable output enable filter

• Low standby current: 4 μA (with 3 channels

enabled), typical

• Low operating current: 13 μA (with 3 channels

enabled), typical

The device has programmable internal tuning capaci-

tors for each input channel. The user can program

these capacitors up to 63 pF, 1 pF per step. These

internal tuning capacitors can be used effectively for

fine-tuning of the external LC resonant circuit.

• Serial Peripheral Interface (SPI™) with external

devices

• Supports Battery Back-Up mode and batteryless

operation with external circuits

• Industrial and Extended Temperature Range:

-40°C to +85°C (industrial)

The device is optimized for very low current consump-

tion and has various battery-saving low-power modes

(Sleep, Standby, Active). The device can also be oper-

ated in Battery Back-up and Batteryless modes using a

few external components.

Typical Applications:

• Automotive industry applications:

- Passive Keyless Entry (PKE) transponder

- Remote door locks and gate openers

- Engine immobilizer

This device is available in 14-pin PDIP, SOIC, and

TSSOP packages. This device is also used as the AFE

in the PIC16F639.

- LF initiator sensor for tire pressure monitoring

systems

Package Types:

MCP2030

• Security Industry applications:

- Long range access control transponder

- Parking lot entry transponder

PDIP, SOIC, TSSOP

V_SS

- Hands-free apartment door access

- Asset control and management

LCCOM

SCLK/ALERT

RSSI

12 NC

LCX

LCY

LCZ

V_DD

LFDATA/

CCLK/SDIO

V_DD

DS21981A-page 1

12 3 4 5 6 7...66

中文翻译

下载PDF

与MCP2030-I/P相关器件

型号	品牌	获取价格	描述	数据表
MCP2030-I/SL	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2030-I/ST	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2030T	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2030T-I/P	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2030T-I/SL	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2030T-I/ST	MICROCHIP	获取价格	Three-Channel Analog Front-End Device
MCP2035-I/ST	MICROCHIP	获取价格	SPECIALTY ANALOG CIRCUIT
MCP2035T-I/ST	MICROCHIP	获取价格	SPECIALTY ANALOG CIRCUIT
MCP2036	MICROCHIP	获取价格
MCP2036-E/MG	MICROCHIP	获取价格	Inductive Sensor Analog Front End Device

与MCP2030-I/P相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

46
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

35
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

64
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

61

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2030-I/P

MCP2030-I/P 技术参数

MCP2030-I/P 数据手册

与MCP2030-I/P相关器件

与MCP2030-I/P相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2030-I/P

MCP2030-I/P 技术参数

MCP2030-I/P 数据手册

与MCP2030-I/P相关器件

与MCP2030-I/P相关文章

您还可以找

您在本页遇到什么问题？