Order this document by MC3392/D
The MC3392 is a low side protected switch designed for use in harsh
automotive applications which require the capability of handling high
voltages attributed to load and field dump transients, in addition to reverse
and double battery conditions. The three terminal TO–220 is intended to
replace power Darlington transistors in new and existing switching
applications when taking into account the CMOS input levels required by the
MC3392. It offers improved functionality and ruggedness over power
Darlingtons while retaining the same package and pin configuration, and can
be used as a replacement in many applications using the industry standard
TIP100/101 NPN power Darlington transistor.
LOW SIDE
PROTECTED SWITCH
SEMICONDUCTOR
TECHNICAL DATA
The five–terminal TO–220 has the added feature of having a Fault output
(active low) which will indicate the existence of an over temperature,
over–voltage or current limit condition, including an output short to ground.
When driving a moderate load, the MC3392 performs as an extremely
high gain, low saturation Darlington transistor having CMOS input levels. The
primary advantage of the MC3392 over a Darlington transistor is the
additional protection afforded the device and load when driving difficult or
faulty loads. This device incorporates unique internal current limit and
thermal protection circuitry to safeguard itself and the associated load from
catastrophic failure.
Pin 1. Input
2. Output
3. Ground
1
(Heatsink surface
connected to Pin 3)
2
3
The MC3392 is available in a three and five–lead TO–220 package; the
five–lead having the added diagnostic feature. The full featured MC3392 is
also available in a 16 pin wide body SOIC plastic power package.
T SUFFIX
PLASTIC PACKAGE
CASE 221A
(TO–220)
• Designed for Automotive Applications
• Can Be Used as a Replacement for TIP100/101 NPN Power Darlingtons
• Drives Inductive Loads without External Clamp Circuitry
• Withstands Negative and Positive Transient Voltages
• Low ON Voltage
Pin 1. Input
2. Fault
1
• CMOS Logic Compatible Input
3. Ground
4. NC
5. Output
5
• Over Current, Overvoltage, and Thermal Protection
• Extended Operating Temperature Range
• Fault Output
T–1 SUFFIX
PLASTIC PACKAGE
CASE 314D
(TO–220)
Pin 1. NC
2. NC
3. NC
Simplified Block Diagram
16
4. Output
5. Input
6. Fault
7. NC
1
DW SUFFIX
PLASTIC PACKAGE
CASE 751G
CMOS Input
Fast
V
V
in
out
Turnoff
8. NC
Over
Voltage
Detect
9–16. Ground
SOP(8+8)L
Thermal
Shutdown
Current
Limit
ORDERING INFORMATION
Operating
Fault
Temperature Range
Device
Package
MC3392T
Plastic Power
Plastic Power
SOP(8+8)L
MC3392T–1
MC3392DW
T = – 40° to +125°C
A
Gnd
Motorola, Inc. 1996
Rev 0
1
MOTOROLA ANALOG IC DEVICE DATA