MC33910G5AC/MC3433910G5AC
Document Number: MC33910
Rev. 8.0, 3/2010
Freescale Semiconductor
Advance Information
LIN System Basis Chip with High
Side Drivers
33910
The 33910G5/BAC is a Serial Peripheral Interface (SPI) controlled
System Basis Chip (SBC), combining many frequently used functions
in an MCU based system, plus a Local Interconnect Network (LIN)
transceiver. The 33910 has a 5.0 V, 50 mA/60 mA low dropout
regulator with full protection and reporting features. The device
provides full SPI readable diagnostics and a selectable timing
watchdog for detecting errant operation. The LIN Protocol Specification
2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry that
can be disabled for higher data rates.
SYSTEM BASIS CHIP WITH LIN
2ND GENERATION
Two 50 mA/60 mA high side switches with optional pulse-width
modulated (PWM) are implemented to drive small loads. One high
voltage input is available for use in contact monitoring, or as external
wake-up input. This input can be used as high voltage Analog Input.
The voltage on this pin is divided by a selectable ratio and available via
an analog multiplexer.
The 33910 has three main operating modes: Normal (all functions
available), Sleep (VDD off, wake-up via LIN, wake-up inputs (L1), cyclic
sense and forced wake-up), and Stop (VDD on with limited current
capability, wake-up via CS, LIN bus, wake-up inputs, cyclic sense,
forced wake-up and external reset).
AC SUFFIX (Pb-FREE)
98ASH70029A
32-PIN LQFP
The 33910 is compatible with LIN Protocol Specification 2.0, 2.1, and
SAEJ2602-2.
ORDERING INFORMATION
Temperature
Features
Device
Package
• Full-duplex SPI interface at frequencies up to 4.0 MHz
• LIN transceiver capable of up to 100 kbps with wave shaping
• Two 50 mA/60 mA high side switches
• One high voltage analog/logic Input
• Configurable window watchdog
Range (T )
A
MC33910G5AC/R2
MC34910G5AC/R2
MC33910BAC/R2
MC34910BAC/R2
-40°C to 125°C
-40°C to 85°C
-40°C to 125°C
-40°C to 85°C
32-LQFP
• 5.0 V low drop regulator with fault detection and low voltage reset
(LVR) circuitry
• Switched/protected 5.0 V output (used for Hall sensors)
• Pb-free packaging designated by suffix code AC
* See Page 2 for Device Variations
33910
V
BAT
VSENSE
HS1
VS1
VS2
L1
VDD
PWMIN
ADOUT0
LIN INTERFACE
LIN
MCU
MOSI
MISO
SCLK
CS
RXD
TXD
IRQ
HVDD
HS2
WDCONF
RST
Figure 1. 33910 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2009 - 2010. All rights reserved.