Document Number: MC33889
Rev. 14.0, 6/2013
Freescale Semiconductor
Technical Data
System Basis Chip (SBC) with
Low Speed Fault Tolerant CAN
Interface
33889
The 33889 is an SBC having a fully protected, fixed 5.0 V low drop-
out regulator, with current limit, overtemperature pre-warning and
reset. An SBC device is a monolithic IC combining many functions
repeatedly found in standard microcontroller-based systems, e.g.,
protection, diagnostics, communication, power, etc.
SYSTEM BASIS CHIP
An output drive with sense input is also provided to implement a
second 5.0 V regulator using an external PNP. The 33889 has Normal,
Standby, Stop and Sleep modes; an internally switched high side
power supply output with two wake-up inputs; programmable timeout
or window watchdog, Interrupt, Reset, serial peripheral interfce (SPI)
input control, and a low-speed fault tolerant CAN transceiver,
compatible with CAN 2.0 A and B protocols for module-to-module
communications. The combination is an economical solution for power
management, high-speed communication, and control in MCU-based
systems.
EG SUFFIX (PB-FREE)
PLASTIC PACKAGE
98ASB42345B
28-PIN SOICW
Features
ORDERING INFORMATION
• VDD1: 5.0 V low drop voltage regulator, current limitation,
overtemperature detection, monitoring and reset function with total
current capability 200 mA
• V2: tracking function of VDD1 regulator; control circuitry for external
bipolar ballast transistor for high flexibility in choice of peripheral
voltage and current supply
Device
(Add R2 Suffix for
Tape and Reel)
Temperature
Package
Range (T )
A
MC33889BPEG
*MC33889DPEG
-40 to 125°C
28 SOICW
• Four operational modes
*Recommended for new designs
• Low standby current consumption in Stop and Sleep modes
• Built-in low speed 125 kbps fault tolerant CAN physical interface.
• External high voltage wake-up input, associated with HS1 VBAT
switch
• 150 mA output current capability for HS1 VBAT switch allowing drive
of external switches pull-up resistors or relays
V
PWR
33889
VDD1
GND
VSUP
5.0 V
V
2
V2CTRL
V2
RST
INT
MCU
HS1
Local Module Supply
Wake-Up Inputs
Safe Circuits
CS
SCLK
MOSI
MISO
L0
L1
CS
SCLK
MOSI
MISO
SPI
WDOG
RTH
Twisted
Pair
TXD
RXD
CANH
CANL
CAN Bus
RTL
Figure 1. 33889 Simplified Application Diagram
Freescale Semiconductor, Inc. reserves the right to change the detail specifications,
as may be required, to permit improvements in the design of its products.
© Freescale Semiconductor, Inc., 2007-2013. All rights reserved.