Analog, Mixed Signal and Power Management
MC33742
System Basis Chip (SBC) with Enhanced High Speed CAN Transceiver
Applications
MC33742 Simplified Application Drawing
• Aircraft Systems
• Automotive Systems
• Robotic Systems
• Industrial Actuator Control
VPWR
• Marine Applications
33742
V2
• Automotive Electronic Control Units
including a High Speed CAN
VSUP
5.0 V
MCU
VDD
Overview
V2CTRL
V2
The MC33742 and the 33742S are
SPI-controlled System Basis Chips
(SBCs) combining many frequently
used functions along with a CAN 2.0-
compliant transceiver, used in many
automotive electronic control units
(ECUs). The MC33742 SBC has a
fully protected fixed 5.0 V low dropout
internal regulator with current limiting,
over-temperature pre-warning, and
reset. A second 5.0 V regulator can
be implemented using external pass
PNP bipolar junction pass transistor
driven by the SBC’s external V2
sense input and V2 output drive
terminals.
RST
VPWR
CS
SCLK
MOSI
CS
SCLK
MOSI
L0
L1
L2
L3
SPI
MISO
MISO
Safe Circuitry
WDOG
INT
HS
ECU Local Supply
Twisted
TXD
RXD
CANH
CANL
CAN Bus
GND
Pair
The SBC has four main operating
modes: Normal, Standby, Stop, and
Sleep mode. Additionally, there is an
internally switched high side power
supply output, four wake-up input
terminals, a programmable window
watchdog, interrupt, reset, and a SPI
module for communication and
control. The High Speed CAN 2.0 A /B
transceiver is available for inter-
module communication.
Performance
Typical Values
Operating Voltage
Data Rate
5.5 V to 18 V
1.0 Mbps
200 mA
Internal 5.0 V Regulator
External 5.0 V Series Regulator
Supply Current with CAN Wake-up Enabled
Supply Current in Sleep Mode, CAN in Sleep State with CAN
Wake-up Enabled
Supply Current in Stop Mode, CAN in Sleep State with CAN
Wake-up Enabled
200 mA
53 + 12 = 65 µA
80 + 12 = 92 µA
Ambient Operating Temperature
-40°C ≤ TA ≤ 125°C