Order this document by MC33304/D
v
RAIL–TO–RAIL SLEEP–MODE
OPERATIONAL AMPLIFIER
The MC33304 is a monolithic bipolar operational amplifier. This low
voltage rail–to–rail amplifier has both a rail–to–rail input and output stage,
with high output current capability. This amplifier also employs Sleep–Mode
technology. In sleepmode, the micropower amplifier is active and waiting for
an input signal. When a signal is applied, causing the amplifier to source or
sink ≥200 µA (typically) to the load, it will automatically switch to the
awakemode (supplying up to 70 mA to the load). When the output current
drops below 90 µA, the amplifier automatically returns to the sleepmode.
Excellent performance can be achieved as an audio amplifier. This is due
to the amplifier’s low noise and low distortion. A delay circuit is incorporated
to prevent crossover distortion.
SEMICONDUCTOR
TECHNICAL DATA
P SUFFIX
PLASTIC PACKAGE
• Ideal for Battery Applications
• Full Output Signal (No Distortion) for Battery Applications Down
CASE 646
14
to ±0.9 VDC.
1
• Single Supply Operation (+1.8 to +12 V)
• Rail–To–Rail Performance on Both the Input and Output
• Output Voltages Swings Typically within 100 mV of Both Rails
(R = 1.0 mΩ)
L
D SUFFIX
PLASTIC PACKAGE
• Two States: “Sleepmode” (Micropower, I = 110 µA/Amp) and
D
14
CASE 751A
(SO–14)
“Awakemode” (High Performance, I = 1200 µA/Amp)
1
D
• Automatic Return to Sleepmode when Output Current Drops Below
Threshold, Allowing a Fully Functional Micropower Amplifier
• Independent Sleepmode Function for Each Amplifier
• No Phase Reversal on the Output for Overdriven Input Signals
• High Output Current (70 mA typically)
PIN CONNECTIONS
• 600 Ω Drive Capability
• Standard Pinouts; No Additional Pins or Components Required
• Drop–In Replacement for Many Other Quad Operational Amplifiers
• Similar to MC33201, MC33202 and MC33204 Family
Output 1
Inputs 1
1
2
3
4
5
6
7
14 Output 4
13
Inputs 4
12
1
2
4
3
• The MC33304 Amplifier is Offered in the Plastic DIP or SOIC Package
(P and D Suffixes)
11
10
9
V
V
EE
CC
Sleep–Mode is a trademark of Motorola, Inc.
Inputs 2
Output 2
Inputs 3
Output 3
TYPICAL DC ELECTRICAL CHARACTERISTICS (T = 25°C)
A
Characteristic
V
CC
= 2.0 V
V
CC
= 3.3 V
V = 5.0 V
CC
Unit
8
Input Offset Voltage
mV
V
IO(max)
MC33304
±10
±10
±10
(Quad, Top View)
Output Voltage Swing
V
V
(R = 600 Ω)
(R = 600 Ω)
L
1.85
0.15
3.10
0.15
4.75
0.15
V
V
OH
OL
L
min
max
ORDERING INFORMATION
Operating
Power Supply Current
per Amplifier (I )
D
Temperature Range
Device
Package
Awakemode
Sleepmode
1.625
140
1.625
140
1.625
140
mA
µA
MC33304D
MC33304P
SO–14
T
A
= – 40° to +105°C
Plastic DIP
Specifications are for reference only and not necessarily guaranteed. V
= Gnd.
EE
Motorola, Inc. 1996
Rev 0
1
MOTOROLA ANALOG IC DEVICE DATA