Document Number: MC33186
Rev. 8.0, 4/2013
Freescale Semiconductor
Technical Data
H-Bridge Driver
33186
The 33186 is a monolithic H-Bridge ideal for fractional horsepower
DC-motor and bi-directional thrust solenoid control. The IC
incorporates internal control logic, charge pump, gate drive, and low
RDS(ON) MOSFET output circuitry. The 33186 is able to control
continuous inductive DC load currents up to 5.0 A. Output loads can
be pulse width modulated (PWMed) at frequencies up to 10 kHz. This
device is powered by SMARTMOS technology.
H-BRIDGE MOTOR DRIVER
The 33186 is parametrically specified over a temperature range of
-40 C TA 125 C, 5.0 V V+ 28 V. The IC can also be operated
up to 40 V with de-rating of the specifications. The IC is available in a
surface mount power package with exposed pad for heat sinking.
Features
• Overtemperature, short-circuit protection, and overvoltage
protection against transients up to 40 V at VBAT, typical
• RDSON = 150 m for each output transistor at 25 C
• Continuous DC load current 5.0 A (TC < 100 C
• Output current limitation at typ 6.5 A +/- 20%
• Short-circuit shutdown for output currents over 8.0 A
• Logic Inputs TTL/CMOS compatible
VW SUFFIX (PB-FREE)
98ASH70702A
20-PIN HSOP
ORDERING INFORMATION
Temperature
Device
• Operating frequency up to 20 kHz
• Undervoltage disable function
(For Tape and Reel,
add an R2 suffix)
Package
Range (T )
A
• Diagnostic output, 2 disable input
• Coding input for alternative functions
• Stable operation with an external capacitance of 47 F minimum at
VBAT
MC33186HVW1
MC33186HVW2
-40 to 125 °C
20 HSOP
V
33186
PWR
5.0 V
CP
SF
VBAT
OUT1
MOTOR
MCU
or
DSP
IN1
IN2
DI1
DI2
OUT2
PGND
Figure 1. 33186 Simplified Block Diagram
*This document contains certain information on a product under development. Fre-
escale reserves the right to change or discontinue this product without notice
© Freescale Semiconductor, Inc., 2007 - 2013. All rights reserved.