Document Number: MC33186
Rev. 6.0, 10/2006
Freescale Semiconductor
Technical Data
H-Bridge Driver
The 33186 is a monolithic H-Bridge ideal for fractional horsepower
DC-motor and bi-directional thrust solenoid control. The IC
33186
incorporates internal control logic, charge pump, gate drive, and low
RDS(ON) MOSFET output circuitry. The 33186 is able to control
continuous inductive DC load currents up to 5.0 A. Output loads can
be pulse width modulated (PWM-ed) at frequencies up to 10 kHz.
H-BRIDGE MOTOR DRIVER
The 33186 is parametrically specified over a temperature range of
-40°C ≤ TA ≤ 125°C, 5.0 V ≤ V+ ≤ 28 V. The IC can also be operated
up to 40 V with de-rating of the specifications. The IC is available in a
surface mount power package with exposed pad for heat sinking.
Features
• Overtemperature, Short-Circuit Protection, and Overvoltage
Protection against Transients up to 40 V at VBAT Typical
• RDSon = 150 mΩ for each output Transistor at 25°C
• Continuous DC Load Current 5 A (TC < 100°C)
• Output Current Limitation at typ 6,5 A +/- 20%
• Short-Circuit Shutdown for Output Currents over 8 A
• Logic Inputs TTL/CMOS Compatible
• Operating Frequency up to 20 kHz
• Undervoltage Disable Function
• Diagnostic Output, 2 Disable Input
DH SUFFIX
VW SUFFIX (PB-FREE)
PLASTIC PACKAGE
98ASH70702A
20-PIN HSOP
ORDERING INFORMATION
Temperature
Device
Package
Range (T )
A
• Coding Input for Alternative Functions
• Stable Operation with an External Capacitance of Maximum 47 µF
at VBAT
MC33186DH1/R2
MC33186VW1/R2
-40°C to 125°C
20 HSOP
• Pb-Free Packaging Designated by Suffix Code VW
V
33186
PWR
5.0 V
CP
SF
VBAT
OUT1
MOTOR
MCU
or
IN1
IN2
DI1
DI2
DSP
OUT2
PGND
Figure 1. 33186 Simplified Block Diagram
Freescale Semiconductor, Inc. reserves the right to change the detail specifications,
as may be required, to permit improvements in the design of its products.
© Freescale Semiconductor, Inc., 2007. All rights reserved.