MC10E116, MC100E116
5VꢀECL Quint Differential
Line Receiver
Description
The MC10E/100E116 is a quint differential line receiver with
emitter-follower outputs. For applications which require bandwidths
greater than that of the E116, the E416 device may be of interest.
Active current sources plus a deep collector feature of the MOSAIC
III process provide the receivers with excellent common-mode noise
http://onsemi.com
rejection. Each receiver has a dedicated V
optimum symmetry and stability.
supply lead, providing
CCO
If both inverting and non-inverting inputs are at an equal potential of
> −2.5 V, the receiver does not go to a defined state, but rather
current-shares in normal differential amplifier fashion, producing
output voltage levels midway between HIGH and LOW, or the device
may even oscillate.
PLCC−28
FN SUFFIX
CASE 776
The V pin, an internally generated voltage supply, is available to
BB
this device only. For single-ended input conditions, the unused
differential input is connected to V as a switching reference voltage.
BB
V
may also rebias AC coupled inputs. When used, decouple V
CC
BB
BB
MARKING DIAGRAM*
and V via a 0.01 mF capacitor and limit current sourcing or sinking
to 0.5 mA. When not used, V should be left open.
1
BB
The 100 Series contains temperature compensation.
MCxxxE116G
AWLYYWW
Features
• 500 ps Max. Propagation Delay
• V Supply Output
BB
• Dedicated V
Pin for Each Receiver
CCO
xxx
A
WL
YY
WW
G
= 10 or 100
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• PECL Mode Operating Range: V = 4.2 V to 5.7 V
CC
with V = 0 V
EE
• NECL Mode Operating Range: V = 0 V
CC
with V = −4.2 V to −5.7 V
EE
• Output Qs will default low when inputs are < V −2.5 V
CC
• Internal Input 50 kW Pulldown Resistors
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• ESD Protection: Human Body Model; > 2 kV,
Machine Model; > 200 V
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
• Moisture Sensitivity Level:
Pb = 1
Pb−Free = 3
For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 98 devices
• Pb−Free Packages are Available*
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
November, 2006 − Rev. 10
MC10E116/D