MBRF2035CT THRU MBRF20200CT
Isolation 20.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
35 to 200 Volts
Current
20.0 Amperes
ITO-220AB
Features
ꢀ
Plastic material used carries Underwriters
Laboratory Classifications 94V-0
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
Guardring for overvoltage protection
ꢀ
ꢀ
High temperature soldering guaranteed:
260oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
ꢀ
Cases: ITO-220AB molded plastic
Terminals: Leads solderable per MIL-STD-750,
Method 2026
ꢀ
PIN 1
PIN 3
ꢀ
ꢀ
ꢀ
ꢀ
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
PIN 2
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
MBRF MBRF MBRF MBRF MBRF MBRF MBRF
Units
Symbol
Type Number
2035
CT
2045
CT
2050
CT
2060 20100 20150 20200
CT
60
42
60
CT
100
70
CT
CT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
35
24
35
45
31
45
50
35
50
150
105
150
200
140
200
V
V
V
Maximum DC Blocking Voltage
100
Maximum Average Forward Rectified Current at
TC=135oC
Total device
Per Leg
20
10
I(AV)
IFRM
A
A
Peak Repetitive Forward Current Per leg (Rated VR
Square Wave, 20KHz) at Tc=135oC
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
method )
,
20.0
150
IFSM
IRRM
A
A
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at (Note 2)
1.0
0.5
IF=10A, Tc=25O
C
C
-
0.80
0.85
0.75
0.95
0.85
0.99
0.87
1.23
1.10
IF=10A, Tc=125O
VF
V
0.57
0.84
0.72
0.70
0.95
0.85
IF=20A, Tc=25O
IF=20A, Tc=125O
C
C
Maximum Instantaneous Reverse Current @ Tc=25℃
0.1
15.0
0.15
150.0
IR
mA
at Rated DC Blocking Voltage
@ Tc=125℃
Voltage Rate of Change, (Rated VR
)
10,000
dV/dt
RθJC
V/uS
℃/W
pF
Typical Thermal Resistance Per Leg (Note 3) RθJC
1.5
3.5
Typical Junction Capacitance
400
310
Cj
4500 (Note 4)
3500 (Note 5)
1500 (Note 6)
RMS Isolation Voltage (MBRF Type Only) from
Terminals to Heatsink with t=1.0 Second, RH ≦30%
VISO
V
-65 to +150
Operating Junction Temperature Range TJ
Storage Temperature Range TSTG
℃
℃
TJ
-65 to +175
TSTG
Notes: 1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, with Heatsink Size (4”x6”x0.25”) Al-Plate
4. Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset.
5. Clip Mounting (on case), where leads do overlap heatsink.
6. Screw Mounting with 4-40 screw, where washer diameter is ≦4.9 mm (0.19”)
- 174 -