MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
MB4005 THRU MB4010
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
40 Amperes
FEATURES
l Low cost
MB-35N
1.14( 28.9)
1.12( 28.4)
l This series is UL recognized under component
index, file number E127707
0.666( 16.9)
0.626( 15.9)
+
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260oC/10 second, at 5 lbs. (2.3kg) tension.
AC
1.14( 28.9)
1.12( 28.4)
0.728( 18.5)
0.688( 17.5)
0.666( 16.9)
0.626( 15.9)
-
AC
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
0.197( 5.0)
DIA
MECHANICAL DATA
l Case: Molded plastic body
0.32( 8.2)
0.30( 7.8)
EXOPY CASE
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
0.68( 17.3)
0.587( 14.4)
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
UNITS
MB4005 MB401 MB402 MB404 MB406
MB408 MB4010
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Amps
Maximum DC Blocking Voltage
100
1000
Maximum Average Forward Rectified Output
Current, at TC=55℃(See FIG.1)
I(AV)
40
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
Method)
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 20.0A
IFSM
400
Amps
I2T
VF
664
1.1
10
A2S
Volts
TA=25℃
mAmps
mAmps
Maximum DC Reverse Current at
rated DC blocking voltage
IR
1.0
TA=100℃
Isolation Voltage from case to lugs
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
VISO
RqJC
TJ
2500
1.4
VAC
℃/W
℃
-55 to +150
-55 to +150
Storage Temperature Range
TSTG
℃
NOTES:
1.
Unit mounted on 9”×3.5”×4.6”(23×9×11.8cm) Al. finned plate.
2.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
E-mail: sales@cnmic.com Web Site: www.cnmic.com
1/2