MAX4201EVKIT

更新时间： 2024-02-06 05:24:51

品牌	Logo	应用领域
美信 - MAXIM		驱动
页数	文件大小	规格书
4页	37K
描述
780MHz -3dB Bandwidth, 280MHz 0.1dB Gain Flatness, Excellent Capacitive-Load-Driving Capability

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MAX4201EVKIT 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Obsolete	零件包装代码：	SOT-23
包装说明：	SOT-23, 5 PIN	针数：	5
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.33.00.01	风险等级：	5.5
放大器类型：	BUFFER	最大平均偏置电流 (IIB)：	10 µA
标称带宽 (3dB)：	780 MHz	25C 时的最大偏置电流 (IIB)：	10 µA
最大输入失调电压：	15000 µV	JESD-30 代码：	R-PDSO-G5
JESD-609代码：	e0	长度：	2.9 mm
湿度敏感等级：	1	负供电电压上限：	-6 V
标称负供电电压 (Vsup)：	-5 V	功能数量：	1
端子数量：	5	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	LSSOP	封装等效代码：	TSOP5/6,.11,37
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	240	电源：	+-5 V
认证状态：	Not Qualified	座面最大高度：	1.45 mm
标称压摆率：	4200 V/us	子类别：	Buffer Amplifier
最大压摆率：	4 mA	供电电压上限：	6 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	BIPOLAR	温度等级：	INDUSTRIAL
端子面层：	Tin/Lead (Sn85Pb15)	端子形式：	GULL WING
端子节距：	0.95 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	20	宽度：	1.625 mm
Base Number Matches：	1

MAX4201EVKIT 数据手册

19-1351; Rev 0; 3/98

MAX4 2 0 1 Eva lu a t io n Kit

Evluates:1/MAX402

________________Ge n e ra l De s c rip t io n

____________________________Fe a t u re s

The MAX4201 evaluation kit (EV kit) simplifies evalua-

tion of the MAX4201 ultra-high-speed, low-power, low-

noise, open-loop buffer. The EV kit circuit demonstrates

the MAX4201 in the noninverting unity-gain configura-

tion. RF-style connectors (SMA) and 50Ω terminating

resistors are included for test equipment compatibility.

♦ 780MHz -3dB Bandwidth

♦ 280MHz 0.1dB Gain Flatness

♦ 2.1nV/ Hz Voltage Noise Density

√

♦ 0.8pA/ Hz Current Noise Density

√

This EV kit can also be used to evaluate the MAX4200

and MAX4202 (contact Maxim for free samples). Note

that the MAX4201 has an internal 50Ω output termina-

tion resistor, and the MAX4202 has an internal 75Ω out-

put termination resistor, while the MAX4200 has no

inte rna l outp ut te rmina tion re s is tor (re fe r to the

MAX4200–MAX4205 data sheet for more information).

♦ 4200V/µs Slew Rate

♦ Excellent Capacitive-Load-Driving Capability

♦ Fully Assembled and Tested Surface-Mount

Board

Co m p o n e n t Lis t

_______________Ord e rin g In fo rm a t io n

DESIGNATION QTY

DESCRIPTION

PART

TEMP. RANGE

IC PACKAGE

MAX4201EVKIT

-40°C to +85°C

8 SO

10µF, 10V, 20% tantalum capacitors

AVX TAJB106M010 or

C1, C3

Sprague 293D106X0010B

C2, C4

IN, OUT

0.1µF, 10% ceramic capacitors

SMA connectors

_________________________Qu ic k S t a rt

The MAX4201 EV kit is fully assembled and tested.

Follow these steps to verify board operation. Do not

turn on the power supply until all connections are

completed.

49.9Ω, 1% resistor

0Ω resistor

MAX4201ESA

None

MAX4201 PC board

MAX4200–MAX4205 data sheet

1) The circuit requires supply voltages of ±4.0V to

±5.5V. For evaluation purposes, connect a +5V

supply to the pad labeled VCC and a -5V supply to

the pad labeled VEE. Connect the power-supply

grounds to the pad marked GND.

2) Connect the output marked OUT to an oscilloscope

__________________Co m p o n e n t S u p p lie rs

through a terminated 50Ω cable.

SUPPLIER

AVX

SPRAGUE

PHONE

FAX

3) Turn on the power supply. Apply a signal of ±3.3V

maximum to the SMA connector marked IN+.

(803) 946-0690

(603) 224-1961

(803) 626-3123

(603) 224-1430

4) Verify the output signal on the oscilloscope. (Note:

When using a 50Ω terminated oscilloscope input,

the output amplitude observed on the oscilloscope

will be half that on the input. This is due to the volt-

age divider formed by the internal 50Ω back-termi-

nating resistor and the oscilloscope input termina-

tion impedance.)

Note: Please indicate that you are using the MAX4201 when

contacting these component suppliers.

________________________________________________________________ Maxim Integrated Products

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.

For small orders, phone 408-737-7600 ext. 3468.

12 3 4

下载PDF

与MAX4201EVKIT相关器件

型号	品牌	描述	获取价格	数据表
MAX4202	MAXIM	780MHz -3dB Bandwidth, 280MHz 0.1dB Gain Flatness, Excellent Capacitive-Load-Driving Capab	获取价格
MAX4202ESA	MAXIM	Ultra-High-Speed, Low-Noise, Low-Power, SOT23 Open-Loop Buffers	获取价格
MAX4202ESA	ROCHESTER	BUFFER AMPLIFIER, PDSO8, SO-8	获取价格
MAX4202ESA-T	MAXIM	Buffer Amplifier, 1 Func, BIPolar, PDSO8, SO-8	获取价格
MAX4202EUK	MAXIM	Buffer Amplifier, 1 Func, BIPolar, PDSO5	获取价格
MAX4202EUK+	MAXIM	Buffer Amplifier, 1 Func, BIPolar, PDSO5,	获取价格

与MAX4201EVKIT相关文章

MAX487芯片引脚图及功能、应用领域详解
2024-04-17

10
IR2110驱动芯片引脚图及功能、电路图详解
2024-04-17

9
74LS74是什么芯片 74LS74引脚图及功能表
2024-04-16

12
CD4511芯片引脚图及功能、电路图解析
2024-04-15

20

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX4201EVKIT

MAX4201EVKIT 技术参数

MAX4201EVKIT 数据手册

与MAX4201EVKIT相关器件

与MAX4201EVKIT相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX4201EVKIT

MAX4201EVKIT 技术参数

MAX4201EVKIT 数据手册

与MAX4201EVKIT相关器件

与MAX4201EVKIT相关文章

您还可以找

您在本页遇到什么问题？