19-5972; Rev 3; 7/11
Multiprotocol Dual Smart Card Interface
DS807
General Description
Features
♦ Integrated ISO 7816 UART Provides Complete
The DS8007 multiprotocol dual smart card interface is a
low-cost, dual smart card reader interface supporting
Interface/Control for Two Separate Smart Card
®
Devices
all ISO 7816, EMV , and GSM11-11 requirements.
Through its 8-bit parallel bus and dedicated address
selects (AD3–AD0), the DS8007 can easily and directly
connect to the nonmultiplexed byte-wide bus of a
Maxim secure microcontroller. Optionally, the parallel
bus can be multiplexed to allow direct access to the
multiplexed bus of an 80C51-compatible microcon-
troller through MOVX memory addressing.
♦ 8kV (min) ESD Protection on Card Interfaces
♦ Internal IC Card Supply Voltage Generation
5.0V 5%, 65mA (max)
3.0V 8%, 50mA (max)
1.8V 10%, 30mA (max)
♦ Automatic Card Activation, Deactivation, and Data
Communication Controlled by Dedicated Internal
Sequencer
One integrated ISO 7816 UART is multiplexed among
the interfaces to allow high-speed automatic smart card
processing with each card-possessing, independent,
variable, baud-rate capability. The card interface is con-
trolled by internal sequencers that support automatic
activation and deactivation sequencing, handling all
actions required for T = 0, T = 1, and synchronous pro-
tocols. Emergency deactivation is also supported in
case of supply dropout. A third card is supported
through the auxiliary I/O. The same set of I/O can option-
ally be used as additional serial interface for the UART.
♦ Host Interface Through an 8-Bit Parallel Bus (User-
Selectable Multiplexed or Nonmultiplexed Modes)
♦ Chip Select and Three-State Bus Allow Multiple
Devices (Card Readers and Memories) on Bus
♦ 8-Character Receive FIFO with Optional
Programmable Depth/Threshold
♦ I/O Interface Pin to External ISO 7816 UART for
Auxiliary Interface
♦ Separate Card Clock Generation (Up to 10MHz)
with 2x Frequency Doubling
The DS8007 provides all electrical signals necessary to
interface with two smart cards. The integrated voltage
converter ensures full cross-compatibility between 1.8V/
3V/5V cards and a 1.8V/3V/5V environment, and allows
operation within a 2.7V to 6V supply voltage range.
♦ Selectable Card Clock Stop High, Stop Low, or
Internally Generated 1.25MHz (for Card Power-
Down)
♦ EMV-Certified Reference Design and Evaluation
Kit Available (DS8007-KIT)
Applications
Banking Applications (Point-of-Sale Terminals,
Debit/Credit Payment Terminals, PIN Pads,
Automated Teller Machines)
Pin Configuration
Telecommunications
Pay Television
Access Control
RSTOUT
I/OAUX
I/OA
1
2
3
4
5
6
7
8
9
36 RD
35 D7
34 D6
33 D5
32 D4
31 D3
30 D2
29 D1
28 D0
Ordering Information
C8A
SMART
CARDS
SUPPORTED
DS8007
PRESA
C4A
PIN-
PACKAGE
PART
TEMP RANGE
GNDA
CLKA
2 + auxiliary
2 + auxiliary
DS8007-ENG
-40°C to +85°C
48 LQFP
48 LQFP
V
CCA
DS8007-ENG+ -40°C to +85°C
+Denotes a lead(Pb)-free/RoHS-compliant package.
RSTA 10
I/OB 11
C8B 12
27
V
DD
26 CPA2
25 AGND
EMV is a registered trademark of EMVCo LLC.
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
Note: Some revisions of this device may incorporate devia-
tions from published specifications known as errata. Multiple
revisions of any device may be simultaneously available
through various sales channels. For information about device
errata, go to: www.maxim-ic.com/errata.
LQFP
Typical Operating Circuit appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.