MAX9860
16-Bit Mono Audio Voice Codec
General Description
Features
The MAX9860 is a low-power, voiceband, mono audio
codec designed to provide a complete audio solution
for wireless voice headsets and other mono voice audio
devices. Using an on-chip bridge-tied load mono head-
phone amplifier, the MAX9860 can output 30mW into a
32Ω earpiece while operating from a single 1.8V power
supply. Very low power consumption makes it an ideal
choice for battery-powered applications.
o 1.8V Single-Supply Operation
o Digital Highpass Elliptical Filters with Notch for
217Hz (GSM)
o Mono 30mW BTL Headphone Amplifier
o Dual Low-Noise Microphone Inputs
o Automatic Microphone Gain Control and Noise
Gate
The MAX9860’s flexible clocking circuitry utilizes com-
mon system clock frequencies ranging from 10MHz to
60MHz, eliminating the need for an external PLL and
multiple crystal oscillators. Both the ADC and DAC sup-
port sample rates of 8kHz to 48kHz in either synchro-
nous or asynchronous operation. Both master and slave
timing modes are supported.
o 90dB DAC DR (f = 48kHz)
S
o 81dB ADC DR (f = 48kHz)
S
o Supports Master Clock Frequencies from 10MHz
to 60MHz
o Supports Sample Rates from 8kHz to 48kHz
o Flexible Digital Audio Interface
Two differential microphone inputs are available with a
user-programmable preamplifier and programmable
gain amplifier. Automatic gain control with selectable
attack/release times and signal threshold allows maxi-
mum dynamic range. A noise gate with selectable
threshold provides a means to quiet the channel when
no signal is present. Both the DAC and ADC digital filters
provide full attenuation for out-of-band signals as well as
a 5th order GSM-compliant digital highpass filter. A digi-
tal side tone mixer provides loopback of the micro-
phones/ADC signal to the DAC/headphone output.
o Clickless/Popless Operation
o 2-Wire, I2C-Compatible Control Interface
o Available in 24-Pin, Thin QFN, 4mm x 4mm x
0.8mm Package
Ordering Information
Serial DAC and ADC data is transferred over a flexible
digital I2S-compatible interface that also supports TDM
mode. Mode settings, volume control, and shutdown are
programmed through a 2-wire, I2C-compatible interface.
PART
TEMP RANGE
PIN-PACKAGE
MAX9860ETG+
-40°C to +85°C
24 TQFN-EP*
+Denotes a lead-free/RoHS-compliant package.
*EP = Exposed pad.
The MAX9860 is fully specified over the -40°C to +85°C
extended temperature range and is available in a low-
profile, 4mm x 4mm, 24-pin thin QFN package.
Simplified Block Diagram
DVDDIO
1.7V TO 3.6V
AVDD AND DVDD
1.7V TO 1.9V
Applications
Audio Headsets
Portable Navigation Device
Mobile Phones
2
MAX9860
I C
INTERFACE
Smart Phones
DAC
VoIP Phones
DIGITAL
FILTERING
AND
DIGITAL
AUDIO
INTERFACE
Audio Accessories
DIGITAL AUDIO
INPUT/OUTPUT
DIFF
MIC
ADC
ADC
MIXERS
DIFF
MIC
CLOCK
CONTROL
Pin Configuration and Typical Operating Circuit appear at
end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-4349; Rev 2; 2/12
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
