19-2829; Rev 1; 7/03
Anything-to-LVDS Dual 2 x 2
Crosspoint Switches
General Description
Features
The MAX9390/MAX9391 dual 2 x 2 crosspoint switches
perform high-speed, low-power, and low-noise signal
distribution. The MAX9390/MAX9391 multiplex one of two
differential input pairs to either or both low-voltage differ-
ential signaling (LVDS) outputs for each channel.
Independent enable inputs turn on or turn off each differ-
ential output pair.
ꢀ 1.5GHz Operation with 250mV Differential Output
Swing
ꢀ 2ps
(max) Random Jitter
(RMS)
ꢀ AC Specifications Guaranteed for 150mV
Differential Input
ꢀ Signal Inputs Accept Any Differential Signaling
Standard
Four LVCMOS/LVTTL logic inputs (two per channel) con-
trol the internal connections between inputs and outputs.
This flexibility allows for the following configurations: 2 x 2
crosspoint switch, 2:1 mux, 1:2 splitter, or dual repeater.
This makes the MAX9390/MAX9391 ideal for protection
switching in fault-tolerant systems, loopback switching for
diagnostics, fanout buffering for clock/data distribution,
and signal regeneration.
ꢀ LVDS Outputs for Clock or High-Speed Data
ꢀ High-Level Input Fail-Safe Detection (MAX9390)
ꢀ Low-Level Input Fail-Safe Detection (MAX9391)
ꢀ +3.0V to +3.6V Supply Voltage Range
ꢀ LVCMOS/LVTTL Logic Inputs Control Signal
Routing
Fail-safe circuitry forces the outputs to a differential low
condition for undriven inputs or when the common-
mode voltage exceeds the specified range. The
MAX9390 provides high-level input fail-safe detection
for LVDS, HSTL, and other GND-referenced differential
inputs. The MAX9391 provides low-level input fail-safe
Ordering Information
PART
MAX9390EHJ
MAX9390ETJ*
MAX9391EHJ
MAX9391ETJ*
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
32 TQFP
32 Thin QFN
32 TQFP
detection for LVPECL, CML, and other V -referenced
CC
differential inputs.
32 Thin QFN
Ultra-low 82ps
(max) pseudorandom bit sequence
(P-P)
*Future product—contact factory for availability.
(PRBS) jitter ensures reliable communications in high-
speed links that are highly sensitive to timing error,
especially those incorporating clock-and-data recovery,
or serializers and deserializers. The high-speed switch-
ing performance guarantees 1.5GHz operation and less
than 65ps (max) skew between channels.
Pin Configurations
TOP VIEW
LVDS inputs and outputs are compatible with the
TIA/EIA-644 LVDS standard. The LVDS outputs drive
100 loads. The MAX9390/MAX9391 are offered in a
32-pin TQFP and 5mm x 5mm thin QFN package with
exposed paddle and operate over the extended tem-
perature range (-40°C to +85°C).
32 31 30 29 28 27 26 25
ENB1
OUTB1
OUTB1
GND
1
2
3
4
5
6
7
8
24 V
CC
OUTA0
23
22 OUTA0
21 ENA0
20 GND
Also refer to the MAX9392/MAX9393 with flow-through
pinout.
MAX9390
MAX9391
ENB0
Applications
19 OUTA1
18 OUTA1
17 ENA1
OUTB0
OUTB0
High-Speed Telecom/Datacom Equipment
Central-Office Backplane Clock Distribution
DSLAM
V
CC
Protection Switching
9
10 11 12 13 14 15 16
Fault-Tolerant Systems
TQFP
Functional Diagram and Typical Operating Circuit appear at
end of data sheet.
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.