MAX811, MAX812
4-Pin µP Reset Monitors
The MAX811 and MAX812 are cost–effective system supervisor
circuits designed to monitor V in digital systems and provide a reset
CC
signal to the host processor when necessary. A manual reset input is
provided to override the reset monitor, and is suitable for use as a
push–button reset. No external components are required.
http://onsemi.com
The reset output is driven active within 20 µsec (4 µsec for
F version) of V falling through the reset voltage threshold. RESET
CC
is maintained active for a minimum of 140 msec after V rises above
the reset threshold. The MAX812 has an active–high RESET output
while the MAX811 has an active–low RESET output. The output of
CC
4
SOT–143
3
CASE 318A
the MAX811 is guaranteed valid down to V = 1 V. Both devices are
available in a 4–Pin SOT–143 package.
The MAX811/12 are optimized to reject fast transient glitches on
CC
1
2
the V line. Low supply current of 7 µA (V = 3.3 V) makes these
CC
CC
devices suitable for battery powered applications.
PIN CONNECTIONS
Features
• Precision V Monitor for 1.8 V, 2.7 V, 3.0 V, 3.3 V, 5.0 V
CC
GND
V
CC
4
3
1
2
Nominal Supplies
• Manual Reset Input
• 140 msec Guaranteed Minimum RESET, RESET Output Duration
MAX811 (RESET)
MAX812 (RESET)
MR
• RESET Output Guaranteed to V = 1.0 V (MAX811)
CC
• Low 7 µA Supply Current
• V Transient Immunity
• Small SOT–143–4 Package
• No External Components
CC
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
Typical Applications
• Computers
• Embedded Systems
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 6 of this data sheet.
• Battery Powered Equipment
• Critical µP Power Supply Monitoring
V
CC
V
V
CC
CC
PROCESSOR
RESET
MR
RESET
INPUT
PUSH–
BUTTON
(ACTIVE LOW)
MAX811
GND
GND
Typical Operating Circuit
Semiconductor Components Industries, LLC, 2001
1
Publication Order Number:
January, 2001 – Rev. 3
MAX811/D