19-3491; Rev 0; 1/05
Silicon Oscillator with Reset Output
General Description
Features
The MAX7382 silicon oscillator replaces ceramic res-
onators, crystals, and crystal-oscillator modules as the
clock source for microcontrollers in 3V, 3.3V, and 5V
applications. The MAX7382 features a factory-pro-
grammed oscillator and a microprocessor (µP) power-
on-reset (POR) supervisor.
♦ 2.7V to 5.5V Operation
♦ 10MHz to 32MHz Oscillator
♦ Integrated POR
♦
10ꢀm ꢁlocꢂ Oꢃtpꢃt ꢄriꢅe ꢁapaꢆilitꢇ
♦ 2.5% Initial mccꢃracꢇ
50ppꢀꢈ/ꢁ ꢉreꢊꢃencꢇ ꢄriꢋt
Unlike typical crystal and ceramic-resonator oscillator
circuits, the MAX7382 is resistant to vibration and EMI.
The high-output-drive current and absence of high-
impedance nodes makes the oscillator less susceptible
to dirty or humid operating conditions. With a wide
operating temperature range as standard, the
MAX7382 is a good choice for demanding home appli-
ance and automotive environments.
♦
♦ 50% ꢄꢃtꢇ ꢁꢇcle
♦ 5ns Oꢃtpꢃt Rise and ꢉall Tiꢀe
♦ Low Jitter: 80ps
at 16MHz
P-P
♦ 4ꢀm Operating ꢁꢃrrent at 16MHz
♦ -40/ꢁ to +125/ꢁ Teꢀperatꢃre Range
♦ Sꢀall 5-Pin SOT23 Pacꢂage
The MAX7382 is available with factory-programmed fre-
quencies ranging from 10MHz to 32MHz. See Table 2
for standard frequencies and contact the factory for
custom frequencies. Refer to the MAX7376 data sheet
for frequencies less than 10MHz.
Ordering Information
The MAX7382 is available in a 5-pin SOT23 package.
The MAX7382 standard operating temperature range is
-40°C to +125°C. See the Applications Information sec-
tion for extended operating temperature range.
PIN-
PmꢁKmGE
RESET
OUTPUT
PmRT*
TEMP RmNGE
Active-high
push-pull
MAX7382A_ _ _-T -40°C to +125°C 5 SOT23-5
MAX7382B_ _ _-T -40°C to +125°C 5 SOT23-5
Applications
Active-low
push-pull
White Goods
5 SOT23-5 Open drain
MmX7382ꢁ_ _ _-T -40°ꢁ to +125°ꢁ
Automotive
*Standard version is shown in bold. The first letter after the part
number designates the reset output option. Insert the letter
corresponding to the desired reset threshold level from Table 1
in the next position. Insert the two-letter code from Table 2 in
the remaining two positions for the desired frequency range.
Table 1 and Table 2 are located at the end of the data sheet.
Consumer Products
Appliances and Controls
Handheld Products
Portable Equipment
Microcontroller Systems
Typical Operating Circuit
V
CC
2.7V TO 5.5V
0.1µF
V
CC
OSC1
CLOCK
OSC2
RST
MAX7382
E.C.
RST/RST
µC
GND
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.