19-3807; Rev 0; 9/06
2
I C Port Expander with 8 Push-Pull
and 8 Open-Drain I/Os
General Description
Features
♦ 400kHz I2C Serial Interface
♦ +1.71V to +5.5V Operation
♦ 8 Push-Pull Outputs
The MAX7325 2-wire serial-interfaced peripheral features
16 I/O ports. Ports are divided into eight push-pull out-
puts and eight I/Os with selectable internal pullups and
transition detection. Eight ports are push-pull outputs
and eight I/Os may be used as a logic input or an open-
drain output. Ports are overvoltage protected to +6V.
♦ 8 Open-Drain I/O Ports, Rated to 20mA Sink
Current
♦ I/O Ports are Overvoltage Protected to +6V
♦ Selectable I/O Port Power-Up Default Logic States
♦ Transient Changes are Latched, Allowing
All I/O ports configured as inputs are continuously mon-
itored for state changes (transition detection). State
changes are indicated by the INT output. The interrupt
is latched, allowing detection of transient changes.
When the MAX7325 is subsequently accessed through
the serial interface, any pending interrupt is cleared.
The open-drain outputs are rated to sink 20mA, and are
capable of driving LEDs. The RST input clears the serial
Detection Between Read Operations
♦ INT Output Alerts Change on Inputs
♦ AD0 and AD2 Inputs Select from 16 Slave
Addresses
♦ Low 0.6µA (typ) Standby Current
♦ -40°C to +125°C Temperature Range
2
interface, terminating any I C communication to or from
the MAX7325.
The MAX7325 uses two address inputs with four-level
logic to allow 16 I2C slave addresses. The slave
address also determines the power-up logic state for
the I/O ports, and enables or disables internal 40kΩ
pullups in groups of four ports.
Ordering Information
PKG
CODE
PART
TEMP RANGE PIN-PACKAGE
The MAX7325 is one device in a family of pin-compatible
port expanders with a choice of input ports, open-drain
I/O ports, and push-pull output ports (see Table 1).
MAX7325AEG+ -40°C to +125°C 24 QSOP
E24-1
24 TQFN-EP*
(4mm x 4mm)
The MAX7325 is available in 24-pin QSOP and TQFN
packages and is specified over the -40°C to +125°C
automotive temperature range.
MAX7325ATG+ -40°C to +125°C
T2444-3
+Denotes lead-free package.
*EP = Exposed paddle.
Applications
Cell Phones
SAN/NAS
Servers
Notebooks
Selector Guide
Satellite Radio
Automotive
OPEN-
INTERRUPT
PUSH-PULL
DRAIN
PART
INPUTS
MASK
OUTPUTS
OUTPUTS
Pin Configurations
MAX7324
8
Yes
—
—
8
8
TOP VIEW
MAX7325 Up to 8
MAX7326
MAX7327 Up to 4
Up to 8
—
18 17 16 15 14 13
4
Yes
—
12
12
19
12
SCL
O10
Up to 4
SDA 20
11 O9
21
22
23
24
10
9
V+
O8
MAX7325
INT
GND
RST
AD2
P7
P6
8
Typical Application Circuit and Functional Diagram appear
at end of data sheet.
EXPOSED PADDLE
7
+
1
2
3
4
5
6
TQFN (4mm x 4mm)
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.